05-11-2020, 02:44 PM
Hi new to the forum and new to berlingo ownership. Just tidying up my berlingo van and the rear bumper needs replacement. So is there to much involved in fitting reverse distance sensors ? I was thinking of going to the breakers for a bumper and wondered what else I would need to complete the installation. The van is a 62 b9. Any help would be appreciated.
More info.
On the interior light there are three lights, the outer ones are not wired up so don’t work. On inspection there is a spare wire up there but doesn’t fit either of the terminals on the light unit. Again is this a simple fix or is it run a feed up there from a perm live.
Thanks in advance Col.
More info.
On the interior light there are three lights, the outer ones are not wired up so don’t work. On inspection there is a spare wire up there but doesn’t fit either of the terminals on the light unit. Again is this a simple fix or is it run a feed up there from a perm live.
Thanks in advance Col.