206 alloys catching

[dannybee]

Put some 206 15" alloys on my 2003 Berlingo but noticed there just rubbing the plastic liner on the rear inner arch.

What would be the best spacers I've seen cheap universal ones or is it worth paying more fur ones that are hubcentric to support the wheel I should only need 5mm

Sent from my XT1068 using Tapatalk

[East]

Warm the plastic up & move it out the way

[david.mckay.3760]

I have 17" on mine with 8mm spacers, 215/45x17 tyres just clear both inside and wheelarch

Sent from my SM-G361F using Tapatalk

[dannybee]

Cheers

Nice pic of a Comma van too lol. I've found some old post and your correct offset is out thinking of trying some 5mm spacers also read about someone getting clearance by riveting the liners back so I'll take another look.

Sent from my XT1068 using Tapatalk

[East]

My 17's are spot on but then I do have an ET of 15

[discodav78]

I've just bought 17" 7j Peugeot vortex wheels for my mk1 facelift berlingo van. Someone told me they would fit but they are also rubbing off the plastic liner. I also want to lower the van 30mil. The tyres that came with the wheels are 205/40/17. Any help would be appreciated.

Sent from my SM-G955F using Tapatalk

[East]

Again what's the ET?