Multi FUnction Display Mount

[Artur_kubica]

Hi. I have, a Citroen BErlingo B9 from 2008 rear with 1,6 16V petrol engine.

I don't have central display on dashboard. I now that is possible to install them, but i don't now how.

I bought a display, but i don't have a plug to install them. I now that i need to connet to some wires, but i don't now to what wires.

Could sombody to help me ?

Pictures of wires in dashboard:









PS: Sorry for my bad English .

[Multispacer]

I don't think it will be quite a straightforward as you think, it is not just a case of wiring up the cables to a multi function display, if your vehicle has not had a display fitted before, it will probably need the functions to be "enabled" in the BSI with a lexia type device.

Mój polski jest jeszcze gorszy!

[Artur_kubica]

I don't think it will be quite a straightforward as you think, it is not just a case of wiring up the cables to a multi function display, if your vehicle has not had a display fitted before, it will probably need the functions to be "enabled" in the BSI with a lexia type device.

Mój polski jest jeszcze gorszy!

I have allready lexia to switch on the display. I need only now witch 5 or 4 cables from main wires in dashboard i need to take and put to the lcd.

[Multispacer]

OK, if that's the case I have a MFD fitted to my 2008 Berlingo Multispace, I can take a photo of the wiring loom if that is of any use to you?

[Artur_kubica]

Yes, that's will be great :-)!

[dumdum]

Wiring colours mean nothing, you will need a wiring diagram, with numbers and where the wires go to, they will go back to the bsi from memory and the display works on canbus, it may or may not go through the same canbus loop as the stereo...

From memory though it goes back to the bsi

Power supplies and earth are easy to sort