Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Always On Power Socket
#1
I've been reading reviews on dash-cams and came across this comment in a (Techmoan) forum post: 

On Peugeot cars, at least on my 406 V6 and also the 307 Griffe, you can move fuse F1 one notch to give constant +12v on the cig. outlet if you wish, default is (as usual) only +12v via the ignition key.

I wondered if its possible to do something similar on my B9 Berlingo, can anyone advise please?

Cheers,

Matt
Matt
......................................................
2019 Multispace BlueHDi 100 Flair Nimbus Grey Met
Reply
#2
The easiest answer is to try it.
At worst, you will only blow a fuse.

Gravity
Reply
#3
I have a OBD2 Direct Link for my Dash Cam which also has a switch that I can turn it on or of as my cam has a parking mode that detects when to car has stopped and just takes one frame per sec in timelapse and then goes into normal if it detects movement hence the need for the power connection. its also handy if you change cars just plug it into the OBD socket
[-] The following 1 user says Thank You to iscom for this post:
  • Matt Haigh
Reply
#4
(13-11-2017, 09:30 PM)iscom Wrote:  I have a OBD2 Direct Link for my Dash Cam ... its also handy if you change cars just plug it into the OBD socket

Not so easy on some models.

I have another car that needs a panel removing with a screwdriver before I can access the OBD socket, and the panel can't be refitted when any plug is connected. Fine for diagnostics but no good for a permanent connection.

A useful tip, but a dedicated live feed would be better for permanent use.

Gravity
Reply
#5
(14-11-2017, 08:21 AM)Gravity Wrote:  Not so easy on some models.

I have another car that needs a panel removing with a screwdriver before I can access the OBD socket, and the panel can't be refitted when any plug is connected.  Fine for diagnostics but no good for a permanent connection.

A useful tip, but a dedicated live feed would be better for permanent use.

Gravity
There is a  OBD2  Male to Female Socket Plug that you can buy Extn Lead   OBD2  there is a  USB Socket  with switch  ODB USB  
I did buy a nextbase hard wire kit (still have) but still  the problem of finding a good power point, felt  the OBD was the best solution 
Reply
#6
I use a OBD connector plug for when I need to disconnect my car battery without losing data or getting spikes on reconnection.

I sit a slave battery in the driver footwell, and with a couple of clips and a short length of twinflex I connect this battery into the OBD socket. Then I can remove the car battery without interrupting my normal supply.

On my early B9 there are a couple of unused fused live connections atop the battery. I am wiring a permanent live from one of these and fitting a twin outlet power socket in the car.

Gravity
Reply
#7
If and when I have to disconnect the battery I use a Car Memory Battery Saver Radio Code which plugs into the Cigar lighter and use its built in battery to keep memory I never thought about using the OBD. The funny thing was had to buy a new battery which was supplied and fitted by my dealer ( but paid for by the AA) after car would not start after not using for a few days, So never had to use it, but now my Stop-Start works now.
Reply
#8
I should have made it clear that I use the slave battery/Obd port dodge on another car I own.
I have only had my B9 for a couple of months and have not yet needed to disconnect its battery.

Gravity
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Service interval notice
Last Post: jocas74
Today 02:23 AM
» Replies: 7
» Views: 359
Winter Tyres
Last Post: geoff
Today 12:19 AM
» Replies: 0
» Views: 17
23 plate Citreon Berlingo classed as a van
Last Post: W Petsa
Yesterday 10:39 PM
» Replies: 2
» Views: 35
The creation of my personal solo-travellor.
Last Post: EM58
Yesterday 06:17 PM
» Replies: 12
» Views: 740
M59 Throttle pedal
Last Post: evdama
Yesterday 01:10 PM
» Replies: 5
» Views: 178
Berlingo 2007 1.6 hdi - intermittent sticky acce...
Last Post: Romahomepete
Yesterday 01:05 PM
» Replies: 7
» Views: 329
roof rack with slats
Last Post: BigVtwin996
Yesterday 11:53 AM
» Replies: 4
» Views: 192
Battery upgrade
Last Post: evdama
27-03-2024 03:58 PM
» Replies: 0
» Views: 99
Wanted: 2003 M59 steering rack
Last Post: evdama
27-03-2024 12:45 PM
» Replies: 1
» Views: 57
Airbag Fault Code
Last Post: Cumbrian
26-03-2024 03:06 PM
» Replies: 1
» Views: 214

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK