Thread Rating:
  • 8 Vote(s) - 3.13 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Changing Seats
#1
Is there anyother seats that fit straight into the berlingo that are more comfy, maybey like the saxo vts or similar
Reply
#2
I suppose any would fit providing the rails fit.
I DO MISS MY BERLINGO Heart
Reply
#3
I would also be interested to know this, thanks
Reply
#4
Me too... I'm guessing that seat rails are pretty much a standard configuration with a manufacturer? Providing the cars are of a similar spec (ie Berli / Saxo / AX etc)
Anyone know of any specialist Ciroen breakers that may know and stock nice seats?
Reply
#5
I checked several PSA models in a scrapyard a few months ago and all the seat rails were the same dimensions. Whether the fittings are any different, I dn't know, but I don't imagine they'd be too difficult to line up.
Reply
#6
PSA?
So the best thing would be to get a seat with the rails rather than hope it'll fit onto the Blingo rails?
Reply
#7
(24-11-2011, 07:12 PM)zedhead Wrote:  PSA?

PSA is the company that makes Citroen & Peugot. Originally from Peugeot Société Anonyme.
The Bus II: 2019 XL Flair 1.2
[-] The following 1 user says Thank You to Guanajuato for this post:
  • zedhead
Reply
#8
Would still like to know if anyone has actually managed to fit a different seat, as mine is so uncomfortable !! I've made it slightly better by sitting up straighter , but still giving me grief (6ft 4ins) :-(
Reply
#9
Seats from other cars will fit i.e saxo. Pug. But they are all Too low. I have a set of 206 gti seats to put in mine but there is a lot of work to get them at the right hight. You'll have to cut/drill off the base of the berlingo seats ( spot welds ) and remove the rails of the be seats and get someone to weld the seat (or drill and bolt) to the original base.
Reply
#10
(26-11-2011, 04:11 AM)duamoHDI Wrote:  Seats from other cars will fit i.e saxo. Pug. But they are all Too low. I have a set of 206 gti seats to put in mine but there is a lot of work to get them at the right hight. You'll have to cut/drill off the base of the berlingo seats ( spot welds ) and remove the rails of the be seats and get someone to weld the seat (or drill and bolt) to the original base.

Do you have any pictures of this swap at all? im looking to do the same but probably with a set of 306 sports seats?

thanks

Chris
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Airbag light won't go out
Last Post: Multispacer
Today 12:00 AM
» Replies: 1
» Views: 25
Berlingo multispace Clockspring issue
Last Post: Multispacer
Yesterday 11:39 PM
» Replies: 1
» Views: 34
Phone call in progress
Last Post: Leonberger
Yesterday 09:11 PM
» Replies: 2
» Views: 32
M49 wiper blades
Last Post: geoff
Yesterday 07:48 PM
» Replies: 4
» Views: 41
DV6C 9HL injector options
Last Post: KD305
Yesterday 06:25 PM
» Replies: 4
» Views: 155
brake master cylinder
Last Post: BigVtwin996
Yesterday 03:28 PM
» Replies: 2
» Views: 24
Hello
Last Post: OMG
Yesterday 01:11 PM
» Replies: 1
» Views: 55
Passenger seat warning light by pass
Last Post: Bluebottle
Yesterday 11:37 AM
» Replies: 0
» Views: 25
How to identify knocking injector
Last Post: brodfather11
Yesterday 10:35 AM
» Replies: 1
» Views: 35
Dangel 4x4 rear brake discs
Last Post: dwr400
Yesterday 05:00 AM
» Replies: 17
» Views: 9243

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK