Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Vacuum oil change & magnetic sump plug
#1
For my next service, I'm thinking of getting the oil sucked out via the Dip stick rather than the traditional method of the sump plug.

The traditional draining of oil from the sump plug still leaves almost half a pint of old oil in there so the suction method must be certainly better ? or would many here disagree with that assumption ?

I'm also thinking of getting the mechanic to fit a magnetic sump plug to collect any metal debris, and changing that every 3 or 4 services , worthwhile ?
Reply
#2
(01-10-2018, 04:55 PM)michaelg Wrote:  I'm also thinking of getting the mechanic to fit a magnetic sump plug to collect any metal debris, and changing that every 3 or 4 services , worthwhile ?

I simply drilled a hole in the original oil screw and glued in a magnet with epoxy.


Attached Files Thumbnail(s)
   
Regards Rolf

_______

Berlingo Blue HDI120 S&S Shine, 08/2016, KYANOS Blue Metallic




[-] The following 1 user says Thank You to rolf50 for this post:
  • michaelg
Reply
#3
Does the magnet collect much ?
Reply
#4
I have used a Pela suction pump for years, and would never give a single thought to grubbing underneath and undoing a sump plug.

Park up after a drive and use the Pela immediately. It takes hot oil. Change the filter at the same time. Ignore the doom mongers - You won't get any problems.

And don't bother with fitting an internal sump magnet - just put one on the outside of the sump. It'll do the same job, which is to capture any fine swarf - not that there is much in modern engines.
Gravity
[-] The following 2 users say Thank You to Gravity for this post:
  • michaelg, ron
Reply
#5
(01-10-2018, 06:26 PM)Gravity Wrote:  I have used a Pela suction pump for years, and would never give a single thought to grubbing underneath and undoing a sump plug.

Park up after a drive and use the Pela immediately. It takes hot oil. Change the filter at the same time. Ignore the doom mongers - You won't get any problems.

And don't bother with fitting an internal sump magnet - just put one on the outside of the sump. It'll do the same job, which is to capture any fine swarf - not that there is much in modern engines.

I agree.I have a large speaker magnet stuck to my sump.
Strawberry flavoured windows  Dodgy
[-] The following 2 users say Thank You to ron for this post:
  • Art b, michaelg
Reply
#6
So a fairly strong magnet then ,,, maybe i'm overthinking but say hypothetically if the magnet came off, you might be left with a lot of swarf floating around.
Reply
#7
(01-10-2018, 07:22 PM)michaelg Wrote:  ... if the magnet came off, you might be left with a lot of swarf floating around.

I'd be very surprised if it ever came off - but if it bothers you, then superglue it on.

Modern engines, coupled with modern oils, produce very little harmful metal particles.
Gravity
Reply
#8
(01-10-2018, 06:15 PM)michaelg Wrote:  Does the magnet collect much ?

Installed it two month ago the first time. I can tell you next year.
Regards Rolf

_______

Berlingo Blue HDI120 S&S Shine, 08/2016, KYANOS Blue Metallic




Reply
#9
If you put a magnet on the outside, how do you clean the swarf off without removing the sump?
Reply
#10
There will be  very little swarf but what there is you can move it to the drain plug hole by dragging it  with the outside magnet to the drain plug hole. Use another slim magnet to pull it out.
2001 1.9d DW8B  Berlingo
[-] The following 1 user says Thank You to brodfather11 for this post:
  • Art b
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Alternative way of using a diesel heater.
Last Post: MrDrizz
Yesterday 10:16 PM
» Replies: 3
» Views: 332
Stereo replacement
Last Post: hawaiianblue
Yesterday 09:41 PM
» Replies: 3
» Views: 443
LED headlight bulbs
Last Post: hawaiianblue
Yesterday 09:39 PM
» Replies: 9
» Views: 766
1.6 Hdi 'Missfire' under load (and a clonk)
Last Post: GraemeT
Yesterday 09:29 PM
» Replies: 29
» Views: 3723
DRIVERS CHAIR
Last Post: Wyvern
Yesterday 07:09 PM
» Replies: 1
» Views: 129
1.9 diesel not starting
Last Post: Rossco155
Yesterday 05:40 PM
» Replies: 7
» Views: 854
New Member
Last Post: Art b
Yesterday 12:54 PM
» Replies: 3
» Views: 296
What Reg Berlingo do you own?
Last Post: Tree
Yesterday 12:37 PM
» Replies: 126
» Views: 82673
lowering a multispace xtr
Last Post: northroadycles
Yesterday 11:30 AM
» Replies: 2
» Views: 582
Hello from Manchester
Last Post: northroadycles
Yesterday 11:29 AM
» Replies: 10
» Views: 1171

[-]
Recent Visitors
Locations of visitors to this page