Posts: 21
Threads: 3
Thanks Received: 0 in 0 posts
Thanks Given: 3
Joined: May 2018
Location: United Kingdom
Reputation:
0
Hi, I've trawled the net, for instructions and videos, but can't find a thing. I've just bought two replacement barrels, and I want to replace the old ones, which don't work with the key I have. I'm not bothered about the keys matching the ignition, etc.. . I just want them incase the remote central locking fails at any some point. Does anyone have instructions for how to change them over? Do I remove the door cards? Any help would be greatly appreciated.
Thanks.
•
Posts: 1,322
Threads: 48
Thanks Received: 271 in 228 posts
Thanks Given: 4
Joined: Sep 2012
Location: Norway
Reputation:
20
Open the Door. Look at the back edge and you'll find a black plastic cover.
Carefully pry that off.
Now you get a good set of pliers, and grab the end of the locking plate you see inside, and pull it out CAREFULLY.
Optional; remove door card and faff about to fish the locking plate out after you lost it down inside...
With the locking plate removed the lock can now be pulled out and the actuator arm disconnected.
Inserting a new lock is the reverse procedure...
(That's how it is on the M49 at least. I think the M59 is the same... )
Posts: 3,073
Threads: 121
Thanks Received: 621 in 578 posts
Thanks Given: 248
Joined: Aug 2016
Location: Lincoln
Reputation:
34
Thanks, at some point I need to see what's going on with my driver's door lock. The whole lock just turns when you try to use the key. At one point it did sometimes lock & unlock in between turns so I guess it's the locking plate loose. For now, the central locking via remote works just fine as does the passenger door & tailgate via the key.
•