Login

tanto · (This post was last modified: 03-04-2019, 10:13 PM by tanto.)

Hi folks, wondering if anyone has had cause to replace the brackets on the ends of the rear torsion bars that hold the ABS sensor cables in place. The parts are number 7 in the attached pic. Mine have rusted away. According to Arnold Clark Citroen they are unavailable despite being on the Citroen Service site.
My local Peugeot dealer is now trying to get them but from what I can see on the web, the Peugeot version is different. Might need to get creative and make my own.
Hopefully hear tomorrow if Peugeot can get them.

Dave.

cancunia · 04-04-2019, 06:47 AM

They apparently have them in stock here:

https://sparesbb.com/4547k1

According to the contact info they're in the UK.

https://sparesbb.com/contacts

Not cheap tho..

tanto · 04-04-2019, 01:45 PM

(04-04-2019, 06:47 AM)Thanks cancunia, I had a look at the link and yes they are a tad expensive especially when they want another £11 plus added for delivery. My local Peugeot dealer is looking into things at the moment but it appears the Citroen brackets are no longer available and as far as we can see, the Peugeot bracket is different although it maybe that it will still fit and do the job.Dave. cancunia Wrote: They apparently have them in stock here:

https://sparesbb.com/4547k1

According to the contact info they're in the UK.

https://sparesbb.com/contacts

Not cheap tho..

tanto · 06-05-2019, 10:29 PM

Well after much searching around I managed to get a pair of brackets from Edwards and Son down in Essex. Although I could have fitted the straight to the van, I have made up a couple of new brackets from aluminium to eliminate the rust problem.

cancunia · 07-05-2019, 06:45 AM

Neat job!

tanto · 07-05-2019, 05:31 PM

(07-05-2019, 06:45 AM)cancunia Wrote: Neat job!

Thanks cancunia,
Fitted them tonight.

Login
Username:
Password:	Lost Password?
	Remember me