Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Blower resister
#1
Hi!
I have a 2004 2.0 HDI with the seemingly common problem of the Blower switch only operating on the highest setting. It does not have air con. I know this is almost certainly the resister pack, but where is it? 
My Haynes Manual is very vague on the subject - The Electrical diagram says 'typical heater' and suggests that it's inside the heater control panel. However some posts on this forum and others suggest that it's up under the passenger footwell and others that it's somewhere above the fuses on the drivers side (mine is right hand drive). Has anyone had the same problem with this particular Berlingo version?
Reply
#2
Solved!
It is behind, and to the left, of the glove compartment. I eased the glove compartment doorstops away from their housings to create more room. Found this
https://www.ebay.co.uk/itm/HEATER-BLOWER...%7Ciid%3A1
Which looks identical apart from the cutouts in the white plastic. two minutes with a Stanley Knife fixed that.
[-] The following 1 user says Thank You to Kevin1841 for this post:
  • Tomcat3
Reply
#3
I'm guessing I can't post photo's because I'm 'Still a Newby'
Reply
#4
(11-08-2020, 11:42 AM)Kevin1841 Wrote:  I'm guessing I can't post photo's because I'm 'Still a Newby'

You can use an image hosting service and post the thumbnail link of your picture, or use the full screen editor "New Reply" in here and at the bottom, use "New Attachment > Choose File > Add Attachment" and then post as usual.

If you use the quick reply box, it has no buttons to add an attachment.
My Van: 2012 B9 1.6 HDi Enterprise
[-] The following 1 user says Thank You to Zion for this post:
  • Kevin1841
Reply
#5
    Big thanks to Zion for explaining about photo's!

So here is the position of the resister pack on my 2004 2.0 HDI
Reply
#6
Here are the two together, (the new one is on the right) you can see that they appear to be identical apart from the cutouts in the white plastic.
A bit of work with the knife was required to make it seat correctly.    
Reply
#7
Nice one, there have been a few people lately with a similar issue, good to know.
My Van: 2012 B9 1.6 HDi Enterprise
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Window Regulator
Last Post: Slimslim
Yesterday 11:46 PM
» Replies: 1
» Views: 280
Outside temperature sensor
Last Post: Rasputin
Yesterday 09:18 PM
» Replies: 2
» Views: 155
Adblu warning again
Last Post: dellwood33
Yesterday 08:08 PM
» Replies: 1
» Views: 86
B9 oil change modification?
Last Post: Mrwilson
Yesterday 07:23 PM
» Replies: 2
» Views: 87
towbar etc
Last Post: brodfather11
Yesterday 07:15 PM
» Replies: 1
» Views: 144
£30 Road Tax
Last Post: gazahull
Yesterday 11:40 AM
» Replies: 56
» Views: 3997
Window shelf
Last Post: lakeside
Yesterday 10:22 AM
» Replies: 1
» Views: 329
2004 multispace rear seat
Last Post: cancunia
Yesterday 07:06 AM
» Replies: 1
» Views: 237
How to get behind the blank buttons on the dashb...
Last Post: cancunia
Yesterday 07:02 AM
» Replies: 10
» Views: 715
Grizz' Prozac for the Soul - Berlingo Multispace
Last Post: Grizz
19-09-2020 08:30 PM
» Replies: 1039
» Views: 335604

[-]
Recent Visitors
Locations of visitors to this page