Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
exterior temp gauge faulty
#1
Hi everyone,
                 The external temperature gauge on my 2012 multispace is going haywire from -9 to +20. I know that the sensor is in the exterior mirror on the OS but my question is has anyone managed to get new sensor from somewhere as my local citroen dealer tell me its a complete mirror housing.

cheers tom
Reply
#2
check the wiring to the sensor first as it could be shorting out
Reply
#3
The sensor is wired right through the mirror casing & hinge, to the plug that connects it to the car. You could cut one off a scrap mirror but it is a pig to dismantle a mirror outer casing and then you would have to join it to the existing wires securely so it couldn't corrode.

They are not removable normally so I expect they aren't available separately. You'd have to at minimum, change the whole glass adjustment motor and temperature sensor as they are joined together by the factory connectors. Much easier to replace the whole mirror.
______________________
Current:
Not a Citroen!
______________________
Previous:
2017 B9 1.6 BlueHDi Van
2012 B9 1.6 HDi Van
2008 M59 1.6 HDi Van
2003 M59 1.9D Van
Reply
#4
(25-09-2020, 11:42 AM)cossieman Wrote:  Hi everyone,
                 The external temperature gauge on my 2012 multispace is going haywire from -9 to +20. I know that the sensor is in the exterior mirror on the OS but my question is has anyone managed to get new sensor from somewhere as my local citroen dealer tell me its a complete mirror housing.

cheers tom

I've had this problem with my 2016 van, you can get replacement sensors on ebay.
However I did this and still had the same problem, with odd temprature readings, if the temp goes negative, the aircon does not cool, this is an issue in an Aussie summer (35deg c +).

The "fix" I eventually came to was to "massage" the flexible conduit between the door and the van body.
This seems to work for a couple of days, upto many months.

The real fix would be to have the wiring loom replaced.
Reply
#5
Those sensors are available new but a scrap one should cost buttons. It's a piece of cake to replace. You'll have the mirror dismantled in a few minutes and the little sensor nipple thing pops out without much fuss. Fishing the wires through the mirror bracket can be a pain but you could just splice the wires of the new sensor into the old wires.
2015 Berlingo Enterprise 1.6 HDi 
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Service interval notice
Last Post: jocas74
Today 02:23 AM
» Replies: 7
» Views: 359
Winter Tyres
Last Post: geoff
Today 12:19 AM
» Replies: 0
» Views: 17
23 plate Citreon Berlingo classed as a van
Last Post: W Petsa
Yesterday 10:39 PM
» Replies: 2
» Views: 35
The creation of my personal solo-travellor.
Last Post: EM58
Yesterday 06:17 PM
» Replies: 12
» Views: 740
M59 Throttle pedal
Last Post: evdama
Yesterday 01:10 PM
» Replies: 5
» Views: 178
Berlingo 2007 1.6 hdi - intermittent sticky acce...
Last Post: Romahomepete
Yesterday 01:05 PM
» Replies: 7
» Views: 329
roof rack with slats
Last Post: BigVtwin996
Yesterday 11:53 AM
» Replies: 4
» Views: 192
Battery upgrade
Last Post: evdama
27-03-2024 03:58 PM
» Replies: 0
» Views: 99
Wanted: 2003 M59 steering rack
Last Post: evdama
27-03-2024 12:45 PM
» Replies: 1
» Views: 57
Airbag Fault Code
Last Post: Cumbrian
26-03-2024 03:06 PM
» Replies: 1
» Views: 214

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK