Running wires in the Tailgate

[hawkeyefxr]

I will be running wires from the tailgate into the nearside of the car, camera wires and 12v supply.
At the top of the tailgate is a flexi rubber tube that the rear run. I want to pull that rubber flexi boot out as i won't be able to do the run in one go.
Anyone pull this flexi tube out, i dare say taking it out is not so bad but whats it like getting it back in.
.tb_button {padding:1px;cursor:pointer;border-right: 1px solid #8b8b8b;border-left: 1px solid #FFF;border-bottom: 1px solid #fff;}.tb_button.hover {borer:2px outset #def; background-color: #f8f8f8 !important;}.ws_toolbar {z-index:100000} .ws_toolbar .ws_tb_btn {cursor:pointer;border:1px solid #555;padding:3px} .tb_highlight{background-color:yellow} .tb_hide {visibility:hidden} .ws_toolbar img {padding:2px;margin:0px}

[Brixmis7]

The grommet will prise out. It's in 2 parts. The main rubber seal and a nylon locating collar. it will go back with the help of some washing up liquid. Be careful not to lose the nylon collar inside the body work.

[hawkeyefxr]

Thanks for the info, i have pulled the flange back and seen some white nylon. I though i would be using washing up liquid lol.
.tb_button {padding:1px;cursor:pointer;border-right: 1px solid #8b8b8b;border-left: 1px solid #FFF;border-bottom: 1px solid #fff;}.tb_button.hover {borer:2px outset #def; background-color: #f8f8f8 !important;}.ws_toolbar {z-index:100000} .ws_toolbar .ws_tb_btn {cursor:pointer;border:1px solid #555;padding:3px} .tb_highlight{background-color:yellow} .tb_hide {visibility:hidden} .ws_toolbar img {padding:2px;margin:0px}