24-04-2021, 12:06 PM
Hi, I know this is a berlingo forum but I'm having troubles with my Dispatch, can anyone link to the bolts that hold the calliper assembly to the stub axle at the rear, I need to change the discs but I cant get the bolts out so will have to grind them off. This is the male torx type bolt and not the slide pins bolt by the way.
Alternatively any ideas on the thread size so I can put hex bolts back in instead, They are a pain in the arse to undo, I've got the correct socket but you cant get a socket in so I've had to use a spanner but the heads are chocolate and just disintegrate, I also think they are threadlocked.
2015 Dispatch 1.6 HDI, Thanks.
Alternatively any ideas on the thread size so I can put hex bolts back in instead, They are a pain in the arse to undo, I've got the correct socket but you cant get a socket in so I've had to use a spanner but the heads are chocolate and just disintegrate, I also think they are threadlocked.
2015 Dispatch 1.6 HDI, Thanks.