Front seat

[CamperKaz]

I'm new here and this is my first ever attempt at anything vehicle related so please be kind .
I'm currently attempting to convert my 63 plate enterprise van. I currently have the double front passenger seat where the centre seat has a 3 point seat belt that requires going through either the bulkhead that I have, or which I could replace with a ladder frame but which still wouldn't give me the space I need. I want to build my sinvle bed on the drivers side so I can still use the passenger side rear sliding door, but the bulkhead is in the way of folding it down over the front seat. I'm wondering if anyone knows if a single passenger seat, maybe from a multistage of the same year would be an easy swap ie the same floor fixings so that I could do away with the bulkhead altogether?

[cancunia]

Welcome to the forum.
I'm fairly sure that I put single seats from a van into my 2013 B9 Multispace. I bought the seats from someone that wanted to fit a double front passenger seat. I'm not sure about the bulkhead though. Is there a particular reason that you need the bed on the driver's side?

[CamperKaz]

Yes, because I want to keep easy access through the passenger side sliding door. I have dogs and it's lower and there's no shiny bumper to scratch.

[cancunia]

Yes, because I want to keep easy access through the passenger side sliding door. I have dogs and it's lower and there's no shiny bumper to scratch.

Ah, no sliding door on the driver's side of a van. I hadn't thought about that before now.