17-12-2021, 12:47 PM
I have just purchased a teepee zenith.
To get more clearance inside for bikes etc i would like to remove the back section of the roof console attached to the roof vent.
I have taken the rear cover off and the two torx in there. But how does it clip to the vent section ? Have done a bit of the usual tugging with no success.
Many thanks
To get more clearance inside for bikes etc i would like to remove the back section of the roof console attached to the roof vent.
I have taken the rear cover off and the two torx in there. But how does it clip to the vent section ? Have done a bit of the usual tugging with no success.
Many thanks


![[-]](http://berlingoforum.b-cdn.net/images/collapse.png)
