08-03-2022, 10:12 AM
Hi Guys
Long time lurker on forum but my first post
Van is a 2018 B9 ,1.6 blue HDI , 100 ps/HP with 69k miles
I Purchased new with 9 miles on clock
Fully serviced every 8/10k miles / 6 Months at main dealer with all filters done about 4 months ago
Sympathetically driven with Daily 50 mile commute to work and back
The Problem :
Very cold start yesterday and was up to temperature , but in a long ish traffic jam the orange warning triangle and engine light came on (visit dealer sign ).
The van drives fine and smooth but the temperature gauge will now not register after re starting from cold
Checked all fluid levels etc and all are ok ,no leaks .
I appreciate it needs connecting to a code reader
Any comments and advice appreciated
Thank you
Long time lurker on forum but my first post
Van is a 2018 B9 ,1.6 blue HDI , 100 ps/HP with 69k miles
I Purchased new with 9 miles on clock
Fully serviced every 8/10k miles / 6 Months at main dealer with all filters done about 4 months ago
Sympathetically driven with Daily 50 mile commute to work and back
The Problem :
Very cold start yesterday and was up to temperature , but in a long ish traffic jam the orange warning triangle and engine light came on (visit dealer sign ).
The van drives fine and smooth but the temperature gauge will now not register after re starting from cold
Checked all fluid levels etc and all are ok ,no leaks .
I appreciate it needs connecting to a code reader
Any comments and advice appreciated
Thank you
![[-]](http://berlingoforum.b-cdn.net/images/collapse.png)
