Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
reversing sensors beep when braking
#1
b9 tepee

when i got the tepee the reversing sensors worked fine

then they started to cheep when i touched the brakes or indicator

I assumed a poor earth so reearthed them to the chassis and all was well for 6 months

the cheep is now back and very annoying so i have disconnected them to stop it 

The power comes from a scotch lock on the reverse wire to the rear of the near side cluster

Only thing that I can think is that this connection isn't good enough but since this thing is French I am wary of cutting the reverse light wire to get a good connection.

Am I wise to avoid cutting it or is it ok ? 

thanks
Reply
#2
Try taking your reversing light bulbs out and see if it still does it, I think it's more likely a poor earth for the lights causing the issue, rather than anything you've done.

A work around might be to put an LED bulb in the reversing lights to stop the current from the brake lights running back up through the reversing light circuit to find an earth.
Could be worse.... Could be a Caddy.
Reply
#3
(04-09-2023, 04:53 PM)ItsGreen Wrote:  Try taking your reversing light bulbs out and see if it still does it, I think it's more likely a poor earth for the lights causing the issue, rather than anything you've done.

A work around might be to put an LED bulb in the reversing lights to stop the current from the brake lights running back up through the reversing light circuit to find an earth.

sounds like good advice, I do that and will probably add an additional earth to the lighting cluster if needed
Reply
#4
(04-09-2023, 04:53 PM)ItsGreen Wrote:  Try taking your reversing light bulbs out and see if it still does it, I think it's more likely a poor earth for the lights causing the issue, rather than anything you've done.

A work around might be to put an LED bulb in the reversing lights to stop the current from the brake lights running back up through the reversing light circuit to find an earth.

found a bit of corrosion on the lighting cluster pin, i cleaned it up but still got a bit of resistance so soldered an earth wire on to the cluster

beep is gone

i am very happy

thanks
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Bettery Issues - A Solution.
Last Post: geoff
Today 10:45 AM
» Replies: 1
» Views: 25
ignition lock ggrrrrrrrrr
Last Post: Jackalus
Today 10:01 AM
» Replies: 9
» Views: 8441
Engine Fan Running
Last Post: DavidM
Today 08:34 AM
» Replies: 3
» Views: 95
Sound proofing windscreen
Last Post: evdama
Yesterday 02:43 PM
» Replies: 1
» Views: 59
Engine cut off when brake released
Last Post: evdama
14-11-2025 07:34 AM
» Replies: 1
» Views: 124
M59 unlocking itself
Last Post: racey83
11-11-2025 09:33 PM
» Replies: 2
» Views: 191
Headlight bulbs repeatedly failing
Last Post: racey83
04-11-2025 09:48 PM
» Replies: 3
» Views: 2345
Radiator fan relay fuse berlingo b9 mk2 2013 dv6...
Last Post: shtu
04-11-2025 09:15 PM
» Replies: 12
» Views: 23552
horn
Last Post: smutts
03-11-2025 08:41 PM
» Replies: 9
» Views: 1362
How many miles
Last Post: smutts
03-11-2025 08:12 PM
» Replies: 8
» Views: 2107

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK