Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FUI: K9 tweeter
#1
Those sneaky little French men. 
The tweeter is installed but the connector is not connected


Attached Files Thumbnail(s)
   
Reply
#2
I'll ask.....
What's a tweeter?
Now a 2019 K9 1.2 petrol.
Before a 2010 B9 1.6 HDi diesel.
Reply
#3
High frequency loudspeaker.
2021 130hp 1.5 BlueHDi EAT8 L2 XTR Gris Platinum
ex: 2003 1.4i cargo
Reply
#4
I checked 3 berlingos today. and all of them had a tweeter, but the cable was connected to a dummy plug. Arfter moving the connector, the owners was happy Smile
Reply
#5
(07-12-2023, 03:55 PM)Tikki Wrote:  I checked 3 berlingos today. and all of them had a tweeter, but the cable was connected to a dummy plug.  Arfter moving the connector, the owners was happy Smile

How hard is it to get to these ?
2022 LWB 1.2 petrol auto combo life (AKA Berlingo K9)
Reply
#6
Learn something new everyday.....
Now a 2019 K9 1.2 petrol.
Before a 2010 B9 1.6 HDi diesel.
Reply
#7
(07-12-2023, 07:14 PM)Daddypig Wrote:  
(07-12-2023, 03:55 PM)Tikki Wrote:  I checked 3 berlingos today. and all of them had a tweeter, but the cable was connected to a dummy plug.  Arfter moving the connector, the owners was happy Smile

How hard is it to get to these ?

They are pioneer tweeters, and i think they are in all K9's, but the cable is just not connected to the speaker. 
take a thin object between the cover and the window devider and pull it away from the window. the plastic cover is hold on by one clip, and just wiggel it of the door cover.
Reply
#8
Can you show some photos of this Tikki.?
Reply
#9
Thought I'd better look at mine.On the driver's side the wiring was correctly connected to the tweeter but on the passenger side the tweeter was not connected and there was no sign of the wiring or the plug. I used my USB endoscope to peer down inside the door card and found the missing plug and was able to retrieve it with a bent coat hanger. Now connected and the radio sounds much better.

A tip for any member looking to remove interior trim fittings; have a look for the part on ebay. The seller will usually post several photos of the part and hopefully show the reverse side and the retaining clips. You can then see which way to push or pull to remove the item


Attached Files Thumbnail(s)
       
[-] The following 1 user says Thank You to Cumbrian for this post:
  • Matt Haigh
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
AC Compressor Clutch
Last Post: tomhick024
Today 05:36 AM
» Replies: 2
» Views: 67
Cruise control retrofit
Last Post: shtu
Yesterday 08:15 PM
» Replies: 4
» Views: 255
Exhaust bracket
Last Post: timpascoe
Yesterday 12:29 PM
» Replies: 1
» Views: 354
Water Leak Boot (tried a number of suggested fix...
Last Post: Will Hawkins
Yesterday 09:15 AM
» Replies: 0
» Views: 68
Tie rod end bad almost every year
Last Post: deejay_xb
Yesterday 05:37 AM
» Replies: 8
» Views: 289
Diagbox / Lexia v7.62 software DVD ISO & pre-ins...
Last Post: Mehal888
15-04-2025 12:57 PM
» Replies: 75
» Views: 42859
Washer Pump *Brand New unopened*
Last Post: Antdad
13-04-2025 05:47 AM
» Replies: 0
» Views: 169
2.0 hdi clutch
Last Post: Martinez
13-04-2025 01:11 AM
» Replies: 0
» Views: 111
Strange noise ?
Last Post: Martinez
13-04-2025 12:57 AM
» Replies: 3
» Views: 459
Key fob
Last Post: evdama
12-04-2025 05:29 PM
» Replies: 3
» Views: 176

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK