[Engine] Crankshaft Pulley Removal BERLINGO HDI 2008

[Grandadjoe]

Hi all

I am in need to re-place my Crankshaft Pulley and Seal 

I was just wondering if anyone could give me some basic steps and advise on this 

I own a Ryobi R181W7-0 Impact wrench but unsure if that will be powerful enough for the bolt 


Any advise will be appreciated 

Cheers 

[evdama]

Not the same car,I know,but I removed mine Dv6eted recently with a dewalt 1/4" drive impact wrench without problem.
A quick chatter clockwise to crack the rust ,then it wound off the opposite way without argument.

I've seen scary YouTube vids where they put a socket
and long T-bar resting on the ground and then crank the starter
Might be the only way if if it's really badly corroded
Make sure it's a good quality socket though.

[Grandadjoe]

Not the same car,I know,but I removed mine Dv6eted recently with a dewalt 1/4" drive impact wrench without problem.
A quick chatter clockwise to crack the rust ,then it wound off the opposite way without argument.

I've seen scary YouTube vids where they put a socket
and long T-bar resting on the ground and then crank the starter
Might be the only way if if it's really badly corroded
Make sure it's a good quality socket though.




Thanks for the info,   we must have seen the same scary YouTube videos 
Hopefully,  will attempt to change it on the weekend