Posts: 3
Threads: 2
Thanks Received: 0 in 0 posts
Thanks Given: 7
Joined: Feb 2017
Location: penzance
Reputation:
0
Hi. I have had to change fuel lines on my 2006 Berlingo 1.6 hdmi, including all the quick release lines and the hand primer now I do not seem to be getting any diesel supply from the tank. I undid the two connector above the timing belt and turned on ignition and there is no fuel coming out. I need to test the fuel pump but cannot find any information on fuses/relays or any wiring diagrams to help me , I have downloaded Citroen service box sedre but even that does not give me the info I need. Can anyone on here point me in the right direction for this info. Thankyou
•
Posts: 1,794
Threads: 43
Thanks Received: 415 in 372 posts
Thanks Given: 137
Joined: Jan 2012
Location: Galloway
Reputation:
33
Does it have a fuel pump in the tank? .
IIRC the early models relied on the injector pump to pull fuel from the tank, and the hand primer to help when bleeding the fuel system. So if you have a hand primer then you dont have a fuel pump in the tank , no need for it .
2020 Rifter 1.5 allure
2010 B9 red XTR w a v.
2001 1.9d DW8B white Berlingo
2005 2.l green Berlingo
2001 1.9d DW8B white Berlingo
berlingo 1.4 red multispace
1993 xud 1.9 red partner
Posts: 1,938
Threads: 81
Thanks Received: 395 in 338 posts
Thanks Given: 165
Joined: Mar 2012
Location: Herefordshire
Reputation:
21
02-06-2026, 02:14 PM
(This post was last modified: 02-06-2026, 02:17 PM by evdama.)
This got me wondering too
The hand primers have a reputation for somtimes being reluctant
Ive seen videos of them needing a suction pump or syringe to get them to play ball after a filter change.
Cranking the engine with a dry injector pump isnt advisable.
It is on my to do list.
But not right at the top
2012 Hdi75 van
The following 1 user says Thank You to evdama for this post:1 user says Thank You to evdama for this post
• peteb5313