Floppy Rear Sliding Door Handles

[thurrockdave]

I know this has been covered at some length in the forum, but I'm a little unclear about the pin replacement.

First of all, I am a complete DIY numpty, but I'm trying to change that ... fed up paying for something I should know how to do myself. With your help, who knows, I may even become a 'proper' man. :lol:

So, using the brute strength, just rip it off method I have removed the door card, trim and torx screws to reveal the rather complicated looking lock/operating assembly.

According to the 'Paynes' manual :whistle: I can see the two rods I need to unclip (marking first of course) and the two torx bolts holding the handle in place.

I assume once I have undone them the handle comes off?

The next bit is really unclear to me .... can anyone describe to me in plain (or even simpler) English what happens next? I think I just need to pull the knackered pin out and replace it with the new one. Lets hope it's that simple.

I tell you what, if you help me out, I'll do a photo tutorial for the forum.

[thurrockdave]

Bumped for the evening shift.

[Trevor]

Bumped for the evening shift.

Sorry cannot be a lot of use about this but I am sure that there is a thread on here about this with some pictures of the 'pin'

[Trevor]

Bumped for the evening shift.

I found the thread but no photos


http://www.berlingoforum.co.uk/showthread.php?tid=240

[Coco]

A search reveals these:-

http://www.berlingoforum.co.uk/showthrea...=rear+door

http://www.berlingoforum.co.uk/showthrea...=rear+door

Might help

[thurrockdave]

Cheers guys!

I'd seen some of them before.

It's still the handle I can't visualise. Can't find a photo or diagram of it anywhere.

Looks like I might have to dive in, sink-or-swim and see how I get on.

[Coco]

What's the worst that could happen....................................................................................

[thurrockdave]

What's the worst that could happen....................................................................................

The wife.

[oldandslow1]

A search reveals these:-

http://www.berlingoforum.co.uk/showthrea...=rear+door

http://www.berlingoforum.co.uk/showthrea...=rear+door

Might help

Chaps,
any reason why I cannot view these links to threads?  JUst says "forbidden on this server" 
Cheers
Chris

[cancunia]

It's a problem with the old links on this forum.

You need to change the link from ".co.uk" to ".com"

For example:
https://www.berlingoforum.com/thread-276...=rear+door