Piece of Rubber

[pitpan]

Hi all,
I'm looking for the rubber flap that is on the driver side of the windscreen cover. It is a slide on slide off piece of rubber that is supposed to protect the engine from rain, snow slush ect ect not that we get a lot of snow in Sydney but we do get some amazing storms.

[evdama]

What's a windscreen cover?

[pitpan]

What's a windscreen cover?

It's the plastic at the bottom of the windscreen, 2 pieces L & R that the wiper motor splines go through, not sure of its proper name.

[steve valentine]

What's a windscreen cover?

It's the plastic at the bottom of the windscreen, 2 pieces L & R that the wiper motor splines go through, not sure of its proper name.

Scuttle panel :thumbsup:

[pitpan]

What's a windscreen cover?

It's the plastic at the bottom of the windscreen, 2 pieces L & R that the wiper motor splines go through, not sure of its proper name.

Scuttle panel :thumbsup:

Thanks, that's the first time I've heard it called that, I thought it was called a Cowling or someting else but all the same thing I suppose. Anyway I require the piece of rubber "flap" on the drivers side that attaches to it if anyone knows where to get or has one.

[addo]

Where's Ron to make comment about me demonstrating my techniques, when you need him?

I'd suggest fronting the counter at Reno-Reck in Wyong if you can. Mitch is the owner; he is a good bloke to deal with and you'll probably think of something else needed along the way.

There are a bunch of rubber things - I'm not sure exactly which you refer to. Largest is the sponge rubber pinchweld at the forward edge of the scuttle metalwork; it also has sponge rubber end blocks. Then there's a shorter length of rubber flap seal over the scuttle area near where air is taken in for the A/C. Finally there's the thin hard rubber pinchweld that caps the edge of your scuttle trim and actually sits on the windscreen glass.

[ron]

Where's Ron to make comment about me demonstrating my techniques, when you need him?

I'd suggest fronting the counter at Reno-Reck in Wyong if you can. Mitch is the owner; he is a good bloke to deal with and you'll probably think of something else needed along the way.

There are a bunch of rubber things - I'm not sure exactly which you refer to. Largest is the sponge rubber pinchweld at the forward edge of the scuttle metalwork; it also has sponge rubber end blocks. Then there's a shorter length of rubber flap seal over the scuttle area near where air is taken in for the A/C. Finally there's the thin hard rubber pinchweld that caps the edge of your scuttle trim and actually sits on the windscreen glass.

I do not get involved with anything to do with rubber,it's so easy to be misinterpreted.:thumbsup::thumbsup: