Debadging Mk3 Van

[til5101]

Going back on what I said about debadging in another post, I want to debadge the rear doors. Does anybody know if the badges have positioning pins that go into the bodywork? I dont want to take them off and be left with holes!

[Argos69]

Ok, I'm 99% sure of this :whistle: , but there should be no pins, just double-sided fixing tape.

A friend of mine fitted the reflective chevron rear door cover sheets, so took his badges off beforehand. He said no holes were left.

If in any doubt, just pop the two black inner door covers off and check the back of the door skin (only takes a minute - I've done this bit before without breaking anything!)

Good luck!