23-04-2011, 01:06 PM
Thanks Ifred
and Others for coments.
The bypass wire is in and a nice press switch fited on dash.
When the car comes "home" withe time to spare I will attempt
the full repair.
Thanks all
mar mite
and Others for coments.
The bypass wire is in and a nice press switch fited on dash.
When the car comes "home" withe time to spare I will attempt
the full repair.
Thanks all
mar mite
(22-04-2011, 09:25 PM)ifred Wrote: I have fixes a fault horn myself quite successfully
Found it was the ribbon cable snapped caused airbag light and horn not to work
Depends on the com2000 unit you have
Mine is a DAV unit I cut of the broken end shortened the ribbon cable and re-soldered to the socket on the back of the airbag unit
was fiddly and took sometime!
I will see if I can post up some pictures of how soon?
to reply to your questions
1. No Its not hi-tech a simple if bad design
3. yes its only a pass thought wire just a bitch being a ribbon cable
which passes trough airbag warning light and horn only on mine
If you have ESP brake a little extra care on column centering