Mk1 Multispace, Micro Camper?
|
Posts: 52
Threads: 5
Thanks Received: 14 in 10 posts
Thanks Given: 14
Joined: May 2013
Location: UK
Reputation:
0
I made some curtains up, from two shower curtains, light weight, shower proof, easy to clean, cheap etc etc. My sewing skills are pretty shonky at best but I'm quite pleased with the outcome.
They're on the springy type curtain wires, screwed to trim clips of the car, so fairly structurally mounted to the metal work.
The front one starts above the seat belts, heads up and in wards at 45 degrees to meet the roofline, then to the middle to meet the other half. I've sewn neo-magnets into the hems, which help keep them together in the middle, to attach them to the metal at the sides and to act as tie backs too!
[Image: IMG_2272.jpg]
[Image: IMG_2273.jpg]
The side one is more simple, one piece which tucks into the cupboards.
The rear hatch has one too, there are two curtain wires here, one to retain it when the boot is lifted. Both wires are mounted to the bootlid, it seemed easier than mounting them to the interior of the car.
[Image: IMG_2274.jpg]
With it all closed up
[Image: IMG_2276.jpg]
And to give you an idea of light levels when shut in, now have in mind this is lunch time in sunny Manchester, it is much better at night, and I find the blue glow quite pleasant.
[Image: IMG_2277.jpg]
[Image: IMG_2278.jpg]
[Image: IMG_2279.jpg]
In broad daylight you can't see the curtains from outside, so at night you have no chance, in fact even with lights on inside and the curtains drawn very little light emits.
Now I want to lower it, stick stupid wide steels on, and sort the paint
•
Posts: 164
Threads: 28
Thanks Received: 13 in 13 posts
Thanks Given: 7
Joined: May 2012
Location: fife
Reputation:
0
(28-08-2013, 03:40 AM)Barnesy Wrote: I imagine it is not for prolonged use, so a fetal position may have to be assumed!
aka spooning ur misses, u sly dawy you! :drool:
MK1 Berlingo, Y-Reg 1.4 Petrol Now LPG Converted.
•
Posts: 164
Threads: 28
Thanks Received: 13 in 13 posts
Thanks Given: 7
Joined: May 2012
Location: fife
Reputation:
0
sally? her sister? u have a 3-some with ur misses and sister? DAMN dude, how do i get a job like that
MK1 Berlingo, Y-Reg 1.4 Petrol Now LPG Converted.
•
Posts: 52
Threads: 5
Thanks Received: 14 in 10 posts
Thanks Given: 14
Joined: May 2013
Location: UK
Reputation:
0
04-12-2013, 06:54 PM
(This post was last modified: 22-06-2014, 02:10 AM by Barnesy.)
I have amassed a load of bits for this:
Front coilovers.
206 alloys. With big balloon tyres I will change for something lower profile in spring
Bonnet protector.
Table(!)
All of these things arrived today, and I have not yet summoned the energy to do anything with them. But I will, and when I do I will proudly show you!
•
Posts: 86
Threads: 8
Thanks Received: 20 in 20 posts
Thanks Given: 0
Joined: Jun 2013
Location: Cornwall UK
Reputation:
0
This is great, love it so far!
Look forward to updates.
Posts: 52
Threads: 5
Thanks Received: 14 in 10 posts
Thanks Given: 14
Joined: May 2013
Location: UK
Reputation:
0
20-01-2014, 10:58 PM
(This post was last modified: 20-01-2014, 11:06 PM by Barnesy.)
I've been fooling around with this again, painted my bonnet satin black, and put some 15inch generic 206 alloys on (which I don't like, only got them for the tyres really)
[Image: 1559549_10152180979466171_1509235457_o.jpg]
Fixed my indicators and wipers, they were inconsistent, due to bad connections in the stalks, disassembled and rebuilt the worn bits with solder. Removing the airbag felt very perilous.
[Image: 58977_10152199514856171_932876389_n.jpg]
Made a table, there is an A3 sized extending bit underneath, it is all retractable into a 25cm(ish) depth of shelf. Pretty solid feeling too, I made it from wood I got off an unwanted piano, it feels lovely.
[Image: 20131218_010601.jpg]
[Image: 20131218_010615.jpg]
And I bought one of these from Ebay, they're really very cheap and come in a variety of lengths, I think it is excellent, well made and nice to operate.
[Image: 20140120_223841.jpg]
Which converts the lighting inside from this (with the factory boot light):
[Image: 20140120_224700.jpg]
To this:
[Image: 20140120_224708.jpg]
A huge difference and one which makes it all the more useful.
More jobs...
I have some Peugeot 308 alloys for it now, 17 inch, by 7.5 which I will fit (somehow).
I still have the coilovers to fit, I'm thinking I might get some wheel arch extensions for a more "Dajiban" look.
Dajiban - http://eurowerks.org/showthread.php?t=21696
The following 1 user says Thank You to Barnesy for this post:1 user says Thank You to Barnesy for this post
• Ol'Jeffers
Posts: 266
Threads: 14
Thanks Received: 26 in 24 posts
Thanks Given: 52
Joined: Nov 2013
Location: Felixstowe
Reputation:
0
but the important question is....
how is it to sleep over night in????
63 plate Berlingo working hard.....
•
Posts: 52
Threads: 5
Thanks Received: 14 in 10 posts
Thanks Given: 14
Joined: May 2013
Location: UK
Reputation:
0
(21-01-2014, 02:49 PM)ATL_driver Wrote: but the important question is....
how is it to sleep over night in????
FINE!!! I slept for two nights at a VW show in it, then cos I had nowhere to be I buggered off over to the seaside for a couple of nights before heading home, it's pretty cool really. It's not as comfy as a king size double bed, but you have to lower your expectations a little when pikeying about the place in a diddy-van!!
The following 1 user says Thank You to Barnesy for this post:1 user says Thank You to Barnesy for this post
• addo
Posts: 2,768
Threads: 23
Thanks Received: 498 in 455 posts
Thanks Given: 48
Joined: Sep 2013
Location: Gloucestershire uk
Reputation:
27
There's a man who Know's what he's doing top marks
Posts: 399
Threads: 20
Thanks Received: 60 in 52 posts
Thanks Given: 19
Joined: Nov 2011
Location: Halifax, W.Yorks
Reputation:
1
Top job on the interior, Looking forward to the exterior plans
'04 Peugeot Partner HDi LX. Lows, Leaks and Wellers. Now matt grey and dent free
•
|
Users browsing this thread: 1 Guest(s)
|
Welcome
|
You have to register before you can post on our site.
|
Latest Threads
|
Dripping water
Last Post: Arfcollins
Today 07:31 PM
» Replies: 11
» Views: 204
|
Hello
Last Post: Whitehartref
Today 03:52 PM
» Replies: 0
» Views: 28
|
Dog guard / Luggage guard for M59 Berlingo / Par...
Last Post: Doc_Brown
Today 09:16 AM
» Replies: 0
» Views: 29
|
Eolys low level
Last Post: Pat888
Yesterday 08:14 PM
» Replies: 9
» Views: 197
|
Removing sticker residue
Last Post: ae3
Yesterday 06:49 PM
» Replies: 10
» Views: 205
|
MyCitroen App
Last Post: Multispacer
Yesterday 10:22 AM
» Replies: 5
» Views: 123
|
2009 berlingo 1.6 hdi EGR issues?
Last Post: evdama
Yesterday 06:54 AM
» Replies: 2
» Views: 86
|
DV6C 9HL injector options
Last Post: shtu
15-04-2024 10:18 PM
» Replies: 3
» Views: 134
|
Advice on Fuel Pump Please
Last Post: magwych
15-04-2024 12:18 PM
» Replies: 0
» Views: 63
|
Crank pulley issues 1.4 05 Multispace
Last Post: Van Rouge
15-04-2024 06:22 AM
» Replies: 3
» Views: 145
|
Recent Visitors
|
|
Hosting by
|
|
|