Posts: 104
Threads: 20
Thanks Received: 3 in 3 posts
Thanks Given: 14
Joined: Apr 2012
Location: KENT
Reputation:
0
I've got horn issues, one minute it won't work the next it's fine. Could it be a bad connection in the steering wheel meaning the air bag has to come out & is it a simple job?
•
Posts: 179
Threads: 25
Thanks Received: 15 in 14 posts
Thanks Given: 9
Joined: Mar 2013
Location: Kilwinning, Ayrshire
Reputation:
0
Likely just the horn is broke especially if you have drove thru any big puddles as the get filled with water very easily. All my years of driving i have yet to come across a horn that is faulty at the steering wheel.
•
Posts: 104
Threads: 20
Thanks Received: 3 in 3 posts
Thanks Given: 14
Joined: Apr 2012
Location: KENT
Reputation:
0
It's been like it for ages, apparently berlingos have a problem with the earth connection in the steering wheel
•
Posts: 179
Threads: 25
Thanks Received: 15 in 14 posts
Thanks Given: 9
Joined: Mar 2013
Location: Kilwinning, Ayrshire
Reputation:
0
Hmm possibility i have a newer berlingo and im a taxi driver and i've never heard of an earth problem with these, is it the mk2 you have?
•
Posts: 104
Threads: 20
Thanks Received: 3 in 3 posts
Thanks Given: 14
Joined: Apr 2012
Location: KENT
Reputation:
0
I'll give it a go I guess, must admit I'm slightly nervous about the airbag....
•
Posts: 1,949
Threads: 14
Thanks Received: 531 in 479 posts
Thanks Given: 188
Joined: Jun 2012
Location: middleshire
Reputation:
23
Make sure you dissconnect the battery and wait 30 minutes before trying to get the airbag off. There are a few threads on here about airbag removal.
Are we there yet?????
Ex 1.6hdi van now 3 seater 1.4 multispace
•
Posts: 1,912
Threads: 29
Thanks Received: 375 in 329 posts
Thanks Given: 67
Joined: Nov 2012
Location: Derbyshire
Reputation:
20
If I don't press ours in just the right place it doesn't work every time. I am getting the hang of it now just experiment a bit while you are out of the way somewhere.
So where does this bit go then ?
•
Posts: 104
Threads: 20
Thanks Received: 3 in 3 posts
Thanks Given: 14
Joined: Apr 2012
Location: KENT
Reputation:
0
Well took it all apart today & it is relatively easy, the bottom clip was a bit of a pig but got there in the end. Any all the connectors were solid so no problem there. Any had a new BSI fitted today & now it works fine as does everything else!!!
•