15" New Steel wheel rims

[jericlin]

Hi
Anyone interested in 15 x 6 1/2J Steel wheels, brand new and unused ?
Couple of weeks before I can tie up details due to holidays, but post if interested, no commitment required.
I took delivery of 5 today and they were virtually perfect, ready for my winter tyres, and refurbishment of my summer ones !

Cheers

Jericlin

[Scott_duffy]

What et are the wheels?

[RolyG]

What et are the wheels?

Wheels are the bits your Berlingo stands on.

[steve valentine]

What et are the wheels?

Wheels are the bits your Berlingo stands on.

What et - offset :whistle:

[Scott_duffy]

Comedian in the house

[taxi]

[Image: 1o37vd.jpg]

[dellwood333]

[Image: 1o37vd.jpg]

Any news on these wheels yet ?

[jericlin]

Sorry about delay, been up to my eyes in grease and then straight back to 12 hour shifts away from home. They are bog standard Peugeot wheels, will get one out and measure it ASAP and post. Will be on to seller soon to see what current status of supply is again ASAP

[jericlin]

The moment you may have been waiting for !!!
The offset would appear to 2 1/2 inches where the inside face is 5 inches from the rear edge of the rim and the rim width overall is 7 1/2 inches.
The manufacturing marks are :-
O 9 C 650501 R 6 C D MEFRO FR 01 13 6 1/2J15H2F IS27 KBA43816 P S 6 1 5 0 0 3 1

[jericlin]

Correction, offset would be 1 1/4 which corresponds to IS27 marked on rim, or ET27 as mentioned elsewhere.
Standard Mk2 2.0litre should have ET19 which is 8mm less, and 185's instead of 205's so it seems quite possible that ET 27's will simply give 16mm overall increase in track and more clearance inboard but reduce clearance outboard ( wheel arches ) but I guess only on full spring
compression
Interesting that 14" models have ET of 19 or 24 and 6.5 or 6J rims
Any one else any thoughts on this subject ?