Thread Rating:
  • 10 Vote(s) - 1.7 Average
  • 1
  • 2
  • 3
  • 4
  • 5
mk3 coilovers
#1
Question 
want a set of coilovers but dont know what fits, i know 306 ones fit the mk2 but no clue what fits the mk3?
Reply
#2
any ideas?
do c4 or 308 ones fit?
Reply
#3
could try this and see if the part numbers are the same as the c4 http://www.berlingoforum.co.uk/showthread.php?tid=251
Reply
#4
Hello!

The 306 coilovers whon't fit the MK3 Berlingo model for sure.

You need to search for cars with similar charriot. Try the Peugeot 307, Citroen C4 models etc.

Searching for the part numbers isn't good ideia because the suspension of the berlingo will be for sure different than the other cars (like the mk2 berlingo is different from the 306's, etc), but they will fit if the charriot is similar!

For example, mk2 berlingo charriot is common to Peugeot 306, Citroen Xsara and Citroen Zx models, so althought the suspension rates where different (and the part numbers), they are interchangeable.. The Mk3 maybe be common to the same category models, but newer, like the Peugeot 307, maybe 308 and Citroen C4 models!
Reply
#5
(26-10-2013, 11:06 AM)P_e_a_R Wrote:  Hello!

The 306 coilovers whon't fit the MK3 Berlingo model for sure.

You need to search for cars with similar charriot. Try the Peugeot 307, Citroen C4 models etc.

Searching for the part numbers isn't good ideia because the suspension of the berlingo will be for sure different than the other cars (like the mk2 berlingo is different from the 306's, etc), but they will fit if the charriot is similar!

For example, mk2 berlingo charriot is common to Peugeot 306, Citroen Xsara and Citroen Zx models, so althought the suspension rates where different (and the part numbers), they are interchangeable.. The Mk3 maybe be common to the same category models, but newer, like the Peugeot 307, maybe 308 and Citroen C4 models!

Havent been on this in ages! thanks for your help! knew 306 ones would not! found out from a fellow member that c4 ones fit the front! but when it comes to the rear the shocks are different which means the originals will have to be kept in the back as the springs will fall out of the rear due to the original shock being to long
Reply
#6
Hello,

You could send your rear shocks to a company that repair shocks. They will made custom shocks from your original ones. They cut the spigot of yours and short the travel of the shock.

This work is cheap. In Portugal this job can be done for around 60€.
[-] The following 1 user says Thank You to P_e_a_R for this post:
  • creith34
Reply
#7
http://www.berlingoforum.co.uk/showthrea...411&page=1
Reply
#8
coilover fitted (c4 ones) some before and after photos

[Image: 2zectco.jpg]

[Image: rwi1x5.jpg]
project "black and decked" my bagged mk3 berlingo 
Reply
#9
Hi there just bought a mk3 and wondering what coilovers to get to lower it , or would springs suffice , many thanks
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Dingo - 05 - 2.0 HDI
Last Post: coakers
Today 10:13 AM
» Replies: 80
» Views: 16495
Panoramic sunroof (+2008) model for weekend camp...
Last Post: Elbie
Today 10:02 AM
» Replies: 5
» Views: 605
Awning for Berlingo Micro Camper
Last Post: Elbie
Today 09:56 AM
» Replies: 7
» Views: 1469
Engine Fault Light Error Code P1434
Last Post: kingy1912
Today 08:25 AM
» Replies: 8
» Views: 654
Bypass heater matrix?
Last Post: Zion
Today 08:01 AM
» Replies: 1
» Views: 421
Reverse lights - fuse
Last Post: Hardnut
Today 12:42 AM
» Replies: 7
» Views: 3084
Grizz' Prozac for the Soul - Berlingo Multispace
Last Post: jj9
Yesterday 09:58 PM
» Replies: 353
» Views: 45241
Front end vibration
Last Post: kingy1912
Yesterday 09:20 PM
» Replies: 8
» Views: 1181
Radio wiring.
Last Post: Zion
Yesterday 06:56 PM
» Replies: 9
» Views: 1299
Eurotunnel Height Restrictions
Last Post: geoff
Yesterday 11:27 AM
» Replies: 9
» Views: 764

[-]
Recent Visitors
Locations of visitors to this page