display fading (MFD B, not bulb related)

[mission]

Good to know that the Cit C3 does not fade. I thought only the green ones do not fade. It bothered me unfortunately.

On my display its only the last digit on the clock thats acting funny and the radio lines. But sinds I have an aftermarket radio the radio bit doesnt work anyways.

Ive installed the C3 display and so far so good

[mission]

Last night I noticed something. The C3 display is a slightly different colour then the Berlingo one;

The Berlingo display seems to be darker, or more red:

   

While the C3 display is lighter and more orange:

   

My camera isnt the best, as on the second picture the letters apear as white, but they are black.
I personally prefer the C3 display as its easier to look at and the colour matches fine to the dashboard and everything.

On the Berlingo display it seems the middle is darker then the edges, could there be anything different to these Berlingo displays making them go bad?
(Oh and ofcourse now im testing stuff out, my stupid original display has fixed itself as its not fading now)

[madasanatter]

The trip computer needs activation in Diagbox/Lexia, otherwise the button will do nothing.

Sorry to comment on an old thread but do you know where the setting is within diagbox/Lexia? I've fitted a new display in mine and it shows trip information but won't reset and seems stuck on 6204 miles.

[cancunia]

Does pressing the button on the end of the indicator stalk cycle through the various counters like MPG, next fill up distance etc?

[saskak]

The trip computer needs activation in Diagbox/Lexia, otherwise the button will do nothing.

Sorry to comment on an old thread but do you know where the setting is within diagbox/Lexia? I've fitted a new display in mine and it shows trip information but won't reset and seems stuck on 6204 miles.

Not too sure if there was an option for reset, but you can switch it off drive around and then switch it back on. I suppose that would reset it if cancunia's suggestions do not work.
Mine is Pug Partner and it uses Diagbox/PP2000 rather than Lexia, but as far as I remember the whole temp/trip stuff were in ECU->replacement parts->AMF->configuration of options. Might be a bit different in Lexia, but it should be fairy the same.

[cancunia]

I probably should have added that if pressing the button at the end of the indicator stalk makes the various counters to cycle through, then a long press should reset the counters. If the stalk button makes no difference at all, then you'll need to check via Lexia / Diagbox that the Trip Computer is enabled in the display.

Just did a Google search on 'berlingo enable trip computer' and came up with various threads worth reading (mostly on this forum), including one with a trip computer stuck on 6214 miles...

https://www.berlingoforum.com/thread-3042.html

https://www.google.com/search?client=ope...8&oe=UTF-8

[dangelateur]

Installed a 'green' version today to replace the orange colored as it faded and the pixels would only be visible a few minute after driving. It came from a C5 and fitted into my Partner Zenith(2006) originally equipped with a sagem 9648634177. As written here before, the green ones don't fade and the pixels are just fine, many thanks for that.
Just it wouldnt recognize my yatour usb box, so i activated it again in PP2000 and it works now. Just a few functions 'extra' like light check when pushing the wiper stalk but it doesnt affect anything. So tripreports/fuelconsumption etc all works