Multi Function Display

[t.hristakiev]

Here pictures with the result:
Display and connector:
   

Dashboard connector and new cables:
   

AMP PBT GF20 Connector and cables to Dashboard connector:
   

The clock connector and new AMP PBT GF20 connector
   

[t.hristakiev]

Change display from Type A to Type B:
   
   
   

[preddy]

Hello everyone!
I'm sorry for digging up this topic. I'm planning to upgrade my Type A display to Type B.
@t.hristakiev - Would you be so kind as to tell me which parts you have used (display and stalk button?)
Thank you in advance

[cancunia]

i have upgraded the display on my berlingo using a display from a 307 and the display surround from a 2 line display from a c5, there are 2 extra wires in the plug going into the right front door but there is no wires in the loom in the door, i connected these to a temperature sensor and it worked

Sorry, I know this is about 5 years old now, but I'm curios about this post from wright.  If I'm reading correctly the MFD can have a temp probe directly connected as opposed to via the BSI. Does anyone have experience of this and / or know which pins on the MFD can be used?

Thanks

[East]

Just done this using xsara parts, I had to trim the plastic a little on the display & drill a couple of holes

[East]

Plastic trim

[East]

Fixing