[Image: IMG-20140226-WA0001-2_zpsu5uvzpx0.jpg]
hi iv recently fitted a 2.0 hdi in my 1.6 hdi mk2 partner/berlingo, iv fitted the new ecu from the doner vechicle which is bosch but single plug, my old ecu was bosch 3 plug. my new ecu is being sent away to be unlocked and enable free run mode so i dont need to change bsi and immobilzer etc but on new loom i have 2 plugs which connect to interior loom on doner, my wiring on van was on a plug that is 1 of the 3 on my old ecu so how can i connect these 2 plugs to my existing loom.
[Image: IMG_3858_zps55447629.jpg]
hi iv recently fitted a 2.0 hdi in my 1.6 hdi mk2 partner/berlingo, iv fitted the new ecu from the doner vechicle which is bosch but single plug, my old ecu was bosch 3 plug. my new ecu is being sent away to be unlocked and enable free run mode so i dont need to change bsi and immobilzer etc but on new loom i have 2 plugs which connect to interior loom on doner, my wiring on van was on a plug that is 1 of the 3 on my old ecu so how can i connect these 2 plugs to my existing loom.
[Image: IMG_3858_zps55447629.jpg]
![[-]](http://berlingoforum.b-cdn.net/images/collapse.png)
