PCD Adapters

[til5101]

I'm struggling to find a set of PCD adapters that fit 4x108 and that give me 5x130 pattern. Anyone seen these?

[Jed Clampit]

I don't think they do a 4 to 5 the only other thing to find out if on psa you can change a 5 stud shaft hub on to a berlingo cratch:

[haulrs]

Never seen such a thing either.... Seen four bolt to four bolt adaptors .
May be less of a nightmare to on sell your five bolt wheels and get some four bolty jobbaz



Sent from my iPhone using Tapatalk

[addo]

I've seen such animals. Made in California, to order. Not cheap. The makers reckoned they'd not had one claim of failure.

[Barnesy]

You can get 4x100 to 5x most things, for the VW kids.

The extra few mm puts one of the 4x108 holes too close to a 5 stud hole, so they are custom part only.

[Image: 8056434553_67ccd39886_z.jpg]

This is my mates Golf on Range Rover classic wheels, so anything is possible, he got the adaptors custom made over here and I think quite cheaply too.

[til5101]

Cheers guys, I found a crowd called G23 Engineering who make them to order, but they don't offer that size on their website.. I want Porsche wheels on the Berlingo, but it might just end up being too expensive. I'd rather spend the money on my Clio!

[Barnesy]

OK, my pal got his from a friend of a friend who did them as a one off in a machine shop. Cost a fraction of G23, we're Northerners, we won't pay their scene prices!!

Any machine shop should do them from a decent general assembly diagram. Solidworks is good, or Sketchup at a push.

[til5101]

Thanks, I'll check them out

[creith34]

ive seen plenty of these over here in northern ireland, not sure where they got them tho :/ saw a few fiesta's running porsche wheels which are the same stud pattern, plus i missed out on an opportunity last month to buy a set of pug fit ones off a 106, i looked in to this and apparently there is quite a few 306's/106's running porsche wheels this might help:

http://106owners.co.uk/forums/showthread...9aa8f885f8

[Barnesy]

This is a photo from that thread:

[Image: 27097236.jpg]

I think I'd pass on that one. Looks a bit sketchy to me.