Search Results
|
Post |
Author |
Forum |
Replies |
Views |
Thanked
[asc]
|
|
|
Thread: Stop Warning Various Error Codes
Post: RE: Stop Warning Various Error Codes
|
Sol |
B9 Second Generation |
29 |
3,031 |
05-01-2023, 05:23 AM |
|
|
Thread: Stop Warning Various Error Codes
Post: RE: Stop Warning Various Error Codes
I think most aftermarket non Citroen or generic scanners will have you running in circles, chasing your tail with phantom codes.
Get Diagbox (full chip Lexia 3) off eBay, stick it on an old laptop or... |
|
Sol |
B9 Second Generation |
29 |
3,031 |
30-11-2022, 06:15 PM |
|
|
Thread: Stop Warning Various Error Codes
Post: RE: Stop Warning Various Error Codes
F40a is a fake code, it's a known bug so ignore it.
Ok. Hardcore BSI reset time..with the BSI exposed, you can see a big fuse looking thing that's green and white, with HS-SH on it, pull that out, wa... |
|
Sol |
B9 Second Generation |
29 |
3,031 |
26-11-2022, 11:30 PM |
|
|
Thread: Stop Warning Various Error Codes
Post: RE: Stop Warning Various Error Codes
I would clean all the connections to the battery, then tighten all the nuts on the battery fuse connector (the plate under the red bit - all the little coloured blocks are fuses) and then if that does... |
|
Sol |
B9 Second Generation |
29 |
3,031 |
25-11-2022, 07:17 PM |
|
|
Thread: Bsm difference
Post: RE: Bsm difference
I couldn't guarantee that is the correct one mate. It needs to be the correct part number to the original, not just a similar part number as far as I'm aware. |
|
Sol |
B9 Second Generation |
3 |
478 |
25-11-2022, 02:39 PM |
|
|
Thread: Stop Warning Various Error Codes
Post: RE: Stop Warning Various Error Codes
Should be between +/- 1mg so something is very wrong. We have another member who had a bad injector 3 and that caused him no-start. Citroen cylinders are numbered right to left (gearbox to cam belt) w... |
|
Sol |
B9 Second Generation |
29 |
3,031 |
25-11-2022, 02:13 PM |
|
|
Thread: Stop Warning Various Error Codes
Post: RE: Stop Warning Various Error Codes
I was hoping it would just be a loose / damp connection maybe in the BSI. The only way to go from here that I can think of is with a meter on the wiring. It might be worth re-seating all those connec... |
|
cancunia |
B9 Second Generation |
29 |
3,031 |
21-11-2022, 11:48 AM |
|
|
Thread: Stop Warning Various Error Codes
Post: RE: Stop Warning Various Error Codes
Can you clear the faults with a reader? Other than that, I'm not sure what to suggest other than following the wiring. Not sure if you have the older 16v or the 8v engine? Is the turbo wastegate vacuu... |
|
cancunia |
B9 Second Generation |
29 |
3,031 |
20-11-2022, 12:44 PM |