16-01-2013, 10:56 PM
17-01-2013, 05:02 AM
You will need the stalk with the switch on it, the stalk is integral to the Com2000.
You will probably also need to get them activated in the BSI with Lexia
You will probably also need to get them activated in the BSI with Lexia
17-01-2013, 02:24 PM
Personally I'd wire the lights up in the conventional manner with a separate loom running a fuse and relay and not get involved with Comms and Lexia. Expense and future hassle. Put the switch in the dash in a spare " hole ".
17-01-2013, 07:31 PM
(17-01-2013, 02:24 PM)geoff Wrote: [ -> ]Personally I'd wire the lights up in the conventional manner with a separate loom running a fuse and relay and not get involved with Comms and Lexia. Expense and future hassle. Put the switch in the dash in a spare " hole ".
That sounds like a plan !!!!
cant br fussed to take wheel off and £160 odd for a new comms
thanks any way