Posts: 1
Threads: 0
Thanks Received: 0 in 0 posts
Thanks Given: 0
Joined: May 2012
Location: Nederland
Reputation:
0
Hi,
Do you think this mfd wil work on a 2004 1.6 16v berlingo. Here in holland I have now the one line display with radio info?
I like the engine info to be displaed.
•
Posts: 1,001
Threads: 18
Thanks Received: 468 in 294 posts
Thanks Given: 211
Joined: Oct 2011
Location: Leeds
Reputation:
3
I can not say for definate but I would give it a try.:thumbsup:
2006 2.0hdi 600 with bench seat.
•
Posts: 200
Threads: 19
Thanks Received: 55 in 38 posts
Thanks Given: 19
Joined: Jan 2012
Location: Bury, Lancs, UK
Reputation:
2
[quote='berli1234' pid='41426' dateline='1365941708']
Hi,
Do you think this mfd wil work on a 2004 1.6 16v berlingo. Here in holland I have now the one line display with radio info?
I like the engine info to be displaed.
I too would definitely give it a try. First make sure you have the correct connector. See pics and description of cables elsewhere in this thread. If your are the same its likely you can fit a type B. Also remove the end cap off the wiper stalk and make sure there is a small hole just off centre for the field change probe. I bought a type B MFD off ebay. It was off a Peugeot 205 or 305. You just have to make sure it says Ecran MFD B on it (Ecran is French for screen). It must of course have the same connector as yours. The display should be a little taller than your present one, as it is 3 lines not 2. Once fitted you will have to remove some of the existing bezel plastic to show the screen fully. Again see the other posts on this thread. You will need the pushbutton from a suitable wiper stalk to change between the various fields but you can test it with a cocktail stick though the small hole once the existing end cap is removed. I got mine from a scrapper. You will definitely need Lexia but it's a very simple change. Suggest you read this thread completely as it contains pretty full advice. Good luck
•