Posts: 21
Threads: 1
Thanks Received: 0 in 0 posts
Thanks Given: 16
Joined: Feb 2013
Location: uk
Reputation:
0
hi that looks totally different from my wiring,my bsm has small fuses and large fuses and i relay for heater plugs i think,have found terminal c3 which is live but cant find c8 and c 13 on the bsm.and cant find an inertier swich on the vehicle.
•
Posts: 21
Threads: 1
Thanks Received: 0 in 0 posts
Thanks Given: 16
Joined: Feb 2013
Location: uk
Reputation:
0
i have now found fuse 32 its ok and getting live feed
put 10 er diesel in now half full still no pulse at injectors
have tried all terminals on bsm and all getting live feed
unpluged every sensor and none of them getting a live feed.
•
Posts: 21
Threads: 1
Thanks Received: 0 in 0 posts
Thanks Given: 16
Joined: Feb 2013
Location: uk
Reputation:
0
my berlingo not got electric pump in tank,so i dont think it has a cut off switch
have looked in both positions you pointed out and nothing there.
•
Posts: 1,001
Threads: 18
Thanks Received: 468 in 294 posts
Thanks Given: 211
Joined: Oct 2011
Location: Leeds
Reputation:
3
Ok, to make sure we've got the right diagrams - on the engine ECU can you tell me how many plugs there are and what colour they are if poss.
:thumbsup:
2006 2.0hdi 600 with bench seat.
Posts: 21
Threads: 1
Thanks Received: 0 in 0 posts
Thanks Given: 16
Joined: Feb 2013
Location: uk
Reputation:
0
09-02-2013, 06:00 PM
(This post was last modified: 09-02-2013, 08:30 PM by mel1987.)
yea mine has 3 plugs all three are black but the plastic
you turn to lock them in position is grey on number 1 plug
and the 3rd plug middle 1 is black.
Also if i take fuse 32 out and put ignition on the hazards
dont flash dont know if that helps.
•
Posts: 21
Threads: 1
Thanks Received: 0 in 0 posts
Thanks Given: 16
Joined: Feb 2013
Location: uk
Reputation:
0
Have just looked at BM34 fuse box there is no live 12volt
on fuses 25 and 28 but fuse 34 has no fuse in, there is
only 1 contact in the fuse holder so im thinking not 1 suppose to be there.
•
Posts: 21
Threads: 1
Thanks Received: 0 in 0 posts
Thanks Given: 16
Joined: Feb 2013
Location: uk
Reputation:
0
terminals 3,11,15 and 8 all have 12 volt feed with ignition on
terminal 7 has negitive feed but terminal 10 has nothing
and when i tested it soon as i touched contact hazard lights came on.
•