Posts: 124
Threads: 17
Thanks Received: 31 in 25 posts
Thanks Given: 93
Joined: Mar 2012
Location: Ipswich
Reputation:
0
I recently bought a multispace with a malfunctioning electric window (drivers side), I have discovered that the window controller has been disconnected, and, on reconnecting have now got power through to the connector block in the door. So far so good and it appears to be the motor that is u/s but can anyone tell me why the passenger window would work with the controller disconnected? It appears to have two channels, passenger and driver's side and the wiring diagram I found seems to confirm this.
•
Posts: 1,322
Threads: 48
Thanks Received: 271 in 228 posts
Thanks Given: 4
Joined: Sep 2012
Location: Norway
Reputation:
20
If the connections exist in the cable going to the door, it may be possible.
(I don't know which are in use.)
If there's no cable going to the door, you're probably out of luck.
(It's bl**dy difficult to pull the cables yourself)
You'll also need to transfer the control boxes that are hidden somewhere behind the dash, and the switches they connect to.
Since this is a different issue from what the original poster had, you really should have started a new thread, and instead added a link to this tread for some 'extra information'.
•