30-01-2021, 05:08 PM
Yeah it was Holt's. One thing I have found, is that it comes out too slowly to build pressure unless you use enough force on the tap on top of the tin. Forcing it to the end takes grunt, hurts the fingers (can use pliers) but once you get it there the pressure it developed in the tyre was significant.
It does have to ooze out of the tyre hole / screw etc till it sets. You need to blow it up with the compressor immediately and drive off to get it to work.
It does have to ooze out of the tyre hole / screw etc till it sets. You need to blow it up with the compressor immediately and drive off to get it to work.
______________________
Current:
Not a Citroen!
______________________
Previous:
2017 B9 1.6 BlueHDi Van
2012 B9 1.6 HDi Van
2008 M59 1.6 HDi Van
2003 M59 1.9D Van
Current:
Not a Citroen!
______________________
Previous:
2017 B9 1.6 BlueHDi Van
2012 B9 1.6 HDi Van
2008 M59 1.6 HDi Van
2003 M59 1.9D Van