Number plate bulbs

[JustFerreting]

Morning! Could anyone tell me how to get the number plate light lenses off on a mk2 Bingo with the big lift up type door? The 'manual' only shows the twin door type and talks about screws that mine doesn't have. Tried pulling and twisting, no joy. Thanks

[BerlingoHDI]

There is a little cut out in the clear lens, just get a small screwdriver and prize off the lens . Refit by clipping back on, some people say you are required to strip internal panel off and faff about but i have never needed too.

[JustFerreting]

BerlingoHDI, many thanks.

[taxi]

As BerlingoHDI says, small screwdriver works well, although I find you get better leverage if you use a slightly bent screwdriver .

[brodfather11]

As BerlingoHDI says, small screwdriver works well, although I find you get better leverage if you use a slightly bent screwdriver .

Had to look twice , thought you said cleavage, mind boggles

illyme:illyme::whistle::whistle:

[taxi]

As BerlingoHDI says, small screwdriver works well, although I find you get better leverage if you use a slightly bent screwdriver .

Had to look twice , thought you said cleavage, mind boggles

illyme:illyme::whistle::whistle:

So, nowt about the bent screwdriver ? :whistle:

[addo]

Peyronie's disease?

[taxi]

Thank god there was no post that mentioned finding the slot easier !!!!!