Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Door grab handles
#1
Both my front inner door grab handle trims are worn and the grey paint has worn off revealing the black plastic. Has anybody replaced, painted, come up with a fix?
I have tried wrapping in carbon fibre vinyl but no success too many contours?
Any ideas? 
2009 XTR
Reply
#2
Photo 
I finished mine just yesterday. 
Sanded the handles down a bit, where there were dents etc. Grey primer, 3 coats of BMW Space Grey, 3 coats of clear lacquer ( all from Halfords).
Looks really good, esp. compared with before.


Attached Files Thumbnail(s)
       
[-] The following 1 user says Thank You to eSPe for this post:
  • Jelevents
Reply
#3
(18-09-2016, 05:44 AM)pompuras@gmail.com Wrote:  I finished mine just yesterday. 
Sanded the handles down a bit, where there were dents etc. Grey primer, 3 coats of BMW Space Grey, 3 coats of clear lacquer ( all from Halfords).
Looks really good, esp. compared with before.

Nice Job, looks realy nice

BTW can you please post the procedure to take the handles off (maybe photos if you have any) and if there are any "watchout" for to take them off without breaking anything..........

I am sure alot of the members of the forum are suffering from this who can benefit

Thanks in advance
Reply
#4
Removing handle is very easy.
There are just clips holding the handle, no screws. I used thin flat screwdriver wrapped around with some sellotape to prevent scratches. I slided the screw driver where the A is on the picture, pulled and then worked the way around the handle.

I forgot to mention, the inside handle bit, that you use to open the door, was quite worn as well. I just sanded it down to black plastic, and used this:
http://www.halfords.com/motoring/car-cle...-wax-375ml

to make it look black.

I am about to spray all grey interior bits so will post more pictures once finished.


Attached Files Thumbnail(s)
   
Reply
#5
Get yourself a set of like these to remove trim and panels without scratches or damage http://www.ebay.co.uk/itm/5-Piece-Car-Do...SwxehXOfW0
They save a lot of swearing.
Are we there yet????? Huh
Ex 1.6hdi van now 3 seater 1.4 multispace
[-] The following 1 user says Thank You to Tomcat3 for this post:
  • eSPe
Reply
#6
(18-09-2016, 05:44 AM)pompuras@gmail.com Wrote:  I finished mine just yesterday. 
Sanded the handles down a bit, where there were dents etc. Grey primer, 3 coats of BMW Space Grey, 3 coats of clear lacquer ( all from Halfords).
Looks really good, esp. compared with before.

Nice one looks very neat, that might be the way to go, thanks
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Discovering the Ideal Web Development Company an...
Last Post: joseph67
Today 04:17 AM
» Replies: 0
» Views: 5
Tyre pressure monitor
Last Post: Blakey
Yesterday 05:13 PM
» Replies: 3
» Views: 206
Berlingo 2007 1.6 hdi - intermittent sticky acce...
Last Post: Dwight07
Yesterday 09:23 AM
» Replies: 9
» Views: 544
brake master cylinder
Last Post: BigVtwin996
Yesterday 08:45 AM
» Replies: 5
» Views: 97
Can you clamp the rubber brake hose?
Last Post: flanagaj
Yesterday 07:06 AM
» Replies: 2
» Views: 106
Are brake pistons / seals a common size?
Last Post: flanagaj
01-05-2024 08:23 PM
» Replies: 3
» Views: 106
Brake lights in spite of changed BSI - need advi...
Last Post: Multispacer
01-05-2024 04:55 PM
» Replies: 2
» Views: 74
Kjøleviften går ikke oransje trekant kommer opp ...
Last Post: Multispacer
01-05-2024 04:36 PM
» Replies: 3
» Views: 100
Front seat removal ..legal ?
Last Post: Bluebottle
01-05-2024 01:02 PM
» Replies: 6
» Views: 136
ABS warning light - possible broken cable???
Last Post: Artymorty
01-05-2024 06:42 AM
» Replies: 16
» Views: 9635

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK