Cruise control fitting - Bath area

[cancunia]

Hi,
It is not possible on 1.9D engines with cable operatred injection pump.


If you have 2.0HDI, it is possible (in most cases, pre 2007 models). You should buy and install a cruise control stick P/N 6242Z9, and then make two settings changes with Lexia:


1.
Go to Global test- BSI - configuraton-manual configuration-witout data.
configuration - cruise control option : change from "missing" to "present". Press F1 to update.

2. Go back to main screen.
injection-diesel engine-engine code (RHY)- configuration--without data-manual configuration-cruise control - change from "absent" to "present"- F1 to update.


The cruise control will work only at fourth and fifth gear, the speed should be above 30 mph.


I'm dont shure about petrol versions, but if they equipped with cablel operated throttle - no chance.

Did my '04 2.0HDi today , just as described above apart from a little uncertainty when Lexia threw up an info screen about not recognising the Injection ECU. Accepted the message and carried on without issue.

Thanks for posting the guide, it was a great help.