Peterh you do not have to remove the bumper at all.
Just the plastic slam panel cover (four torx screws) rad hose pipes (radiator side) air intake pipe/box,
radiator and fan housing assembly and hey presto you now have access to your fan. Note you will also have to disconnect the fan relay connector and the fan connector if you want to take the whole lot right out of the car/van. NB if you wish to save the anti freeze, a clean washing up bowl will usually do the trick
Just the plastic slam panel cover (four torx screws) rad hose pipes (radiator side) air intake pipe/box,
radiator and fan housing assembly and hey presto you now have access to your fan. Note you will also have to disconnect the fan relay connector and the fan connector if you want to take the whole lot right out of the car/van. NB if you wish to save the anti freeze, a clean washing up bowl will usually do the trick