Posts: 89
Threads: 15
Thanks Received: 18 in 16 posts
Thanks Given: 6
Joined: Jun 2012
Location:
Reputation:
3
Hi FOlks
I've posted before about the bite point on my clutch being around 1/2" from floor. Out this morning going up thro the box and it refused to come out of 2nd till I depressed clutch again.Operated thro all gears normally after that.
THen when parking, reverse was a bit crunchy ! Its like the clutch is not fully releasing ???
Any thoughts?
Thanks !
Ger
•
Posts: 3,671
Threads: 20
Thanks Received: 729 in 655 posts
Thanks Given: 2,126
Joined: Apr 2011
Location: Monmouth
Reputation:
18
It sounds like the hydraulic system needs bleeding/fluid change.Do that 1st as the simplest option & see how it goes.Good luck.
Strawberry flavoured windows
•
Posts: 85
Threads: 9
Thanks Received: 12 in 10 posts
Thanks Given: 6
Joined: Nov 2016
Location: Stockport
Reputation:
0
Unless you have a cable clutch like mine and the cable is sticking, or the auto adjust isn't working correctly. I had the same issue with my Berlingo when I first bought it. I lubed it with GT85 and reset the auto adjust and it has been fine since. I will lube it again with AC90 when it stops raining and check it all over again. What Berlingo do you have?
•
Posts: 89
Threads: 15
Thanks Received: 18 in 16 posts
Thanks Given: 6
Joined: Jun 2012
Location:
Reputation:
3
had a look at the combined clutch/brake fluid reservoir and there is no fluid loss........Booked it in to garage on Thursday for them to have a look......
•
Posts: 993
Threads: 23
Thanks Received: 231 in 198 posts
Thanks Given: 46
Joined: Nov 2011
Location: N/W Kent
Reputation:
5
Pleased to read that you have it sorted.
--------------------------------------------------------------
2012 Iron Grey XTR 110 with lots of bits and bobs.
•