Adding heated seats to a k9

[Daddypig]

I have a k9 (combo)

Has anyone swapped their seats for heated seats

I see the switch is built into the seat, anyone know if the loom has the heated seat loom all ready?

I don’t want to bodge stuff, ideally just a swap of the seats 

Thanks

[Neb]

I'm planning to install the elements under a good close fitting seat cover (fake leather/alcantara) and wire into the back of the 12v socket that I don't currently use. I'll probably put the switch on the side of the seat on the plastic trim, there's a little square mark where I assume the factory heater controls are installed.

[ComboLifer]

Local builder has done the same

Got a cheap heated seat pad from eBay, got a decent seat cover and placed the pad under the seat cover, powered by 12v lighter socket.

[Neb]

Local builder has done the same

Got a cheap heated seat pad from eBay, got a decent seat cover and placed the pad under the seat cover, powered by 12v lighter socket.

Thanks for that, gives me confidence I'm not about to do something daft.

Cheers

[Drummond]

I see the switch is built into the seat, anyone know if the loom has the heated seat loom all ready?

I don’t want to bodge stuff, ideally just a swap of the seats 

Have a look under the seat and follow the airbag loom to carpet. I would expect wire terminal there - and free connector for heated seat power supply, if lucky. Maybe someone with OE heated seats could provide reference picture?

K9 wiring diagrams are not that easily available, unfortunately.