Locking the flywheel/crankshaft

[jj9]

1.  Pin the flywheel.
   
2.  Loosen the crankshaft pulley bolt then screw back in finger tight.
   
3.  Unpin the flywheel and rotate the engine Forwards with the crankshaft pulley bolt until you can inert the timing pins.
   
4.  Loosen the crankshaft pulley bolt (it won't be that tight as you cracked it off at #2)
   
5.  Fit the new oil seal & timing belt.
   
6.  Remove timing pins & rotate engine Forwards until you can inert flywheel locking pin.
   
7.  Tighten crankshaft pulley bolt.
   
8.  Unpin flywheel.
   
9.  Turn engine over until you can insert the timing pin to check you got it right.
   
10.  Job done.
    

.