Thread Rating:
  • 13 Vote(s) - 3.54 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Stiff Steering
#1
Hi, I have a 2005 1.9D van with 90k on it. The steering is ok while I am driving with the revs over 1800rpm, when I slow down or stop(under 1800rpm) the steering becomes very stiff. I assume this is something to do with the pump. The belt is in good condition and the correct tightness and the reservoir has the correct amount of fluid in it. The fluid looks good with no "froth". I have come to a conclusion that the return valve might be stuck slightly open, so at low revs there isn't enough pressure to compensate for it. Am I near the mark or way off (wouldn't be the first time!)?
Thanks Tigger Smile[/font]
Reply
#2
Before you do anything else check the UJs on the steering column.
They are known to seize and a goodly amount of WD40-like spray followed closely
by a good dollop ( sorry... technical term! ) of medium grease might just cure this.
The Older I get the Better I Was!  Cool
Reply
#3
(18-02-2013, 07:18 PM)OlJeffers Wrote:  Before you do anything else check the UJs on the steering column.
They are known to seize and a goodly amount of WD40-like spray followed closely
by a good dollop ( sorry... technical term! ) of medium grease might just cure this.

I agree with O'J but I use m/cycle spray chain lube,it has more "body" than WD40 which is not so good for load bearing items.
Use WD40 first to give the chain lube a path & initial freeing off.
Then apply c/lube sparingly a few times over a month
I treat my uj annually,& the c/lube is also good for door hinges etc.
Strawberry flavoured windows  Dodgy
Reply
#4
Thanks guys I'll have a bash at the weekend and see if it makes a diference.
Reply
#5
Hi guys, thanks for the advice but a new pump has fixed the problem, (although it has created a hole in my wallet!)
Thanks
Reply
#6
Just sorted mine out tonight (for the time being) - I suspected the strut top mount, but after removing the strut from the hub it was obvious it wasn't.

It was the Universal joint. Soaked it in WD40, worked it back and forward from lock to lock, repeated several times, then plastered it in grease.

It will need replaced, but it's cured the stickiness and failure to self-centre for now.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
2012 1.6hdi Won't start!
Last Post: lukestewart85
Today 05:48 PM
» Replies: 0
» Views: 12
Speed Camera Warnings
Last Post: StarFish
Today 03:20 PM
» Replies: 4
» Views: 53
Teletrac sat nav tracker
Last Post: ItsGreen
Today 01:45 PM
» Replies: 20
» Views: 13993
Partner Escape Front Struts
Last Post: Iansea
Today 11:49 AM
» Replies: 0
» Views: 37
New owner of a K9 2019
Last Post: Ringo2024
Today 10:44 AM
» Replies: 1
» Views: 26
New To Me Berlingo
Last Post: Paul Chidlow
Today 09:19 AM
» Replies: 0
» Views: 32
Retro-fitting rear view camera
Last Post: berlingogogogogo
Today 09:02 AM
» Replies: 4
» Views: 602
Windscreen wipers banging
Last Post: vampirequeen1
Today 07:15 AM
» Replies: 0
» Views: 22
Wind noise at speed
Last Post: StarFish
Today 06:33 AM
» Replies: 10
» Views: 772
Trip + Clock Help
Last Post: Kelvasco
Yesterday 09:48 PM
» Replies: 0
» Views: 61

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK