(20-09-2014, 03:34 PM)Hardnut Wrote:  I get the maxi fuse, but what the lexia/diagbox got to do with tow bar ?

If using the genuine Citroen connectors already in the car, this needs to be activated for the wiring to work
To activate it you need a Lexia/Diagbox

If you are using non-genuine towbar wiring that does not use the connectors already in the car, then you don't need it activated

There is no plugs in my van. Can I just do it the old fashioned way and just wire it into back lights? I know I couldn't do it on my vectra because of the cambus, wasn't sure it Citroën was the same. This is my first none vauxhall van. The towbar sends the reverse sensors nuts as well, or well can't have everything

(21-09-2014, 08:17 PM)kesty Wrote:  There is no plugs in my van. Can I just do it the old fashioned way and just wire it into back lights? I know I couldn't do it on my vectra because of the cambus, wasn't sure it Citroën was the same. This is my first none vauxhall van. The towbar sends the reverse sensors nuts as well, or well can't have everything

hi you don't need the pugs just buy 7pin relay zr2500 from ebay ten just wire into side lights brake lights and indicators you need the relay to protect your electricts in van simple job

Thank you digger963, thats what I need! A simple solution cheers