Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
I'm hearing better or smth is wrong
#11
tight belt means tight because it's new (almost) or tight -wrong ?

Wysłane z mojego SM-G925F przy użyciu Tapatalka
Reply
#12
Don't know cos its new,? Just sounds a bit tight,maybe it will wear in??,maybe its not a belt,? But sounds like it to me,
Reply
#13
(28-10-2016, 06:16 PM)andy-M Wrote:  tight belt means tight because it's new (almost) or tight -wrong ?

Wysłane z mojego SM-G925F przy użyciu Tapatalka

OK I think I caught the noise there. Sounds like something metallic vibrating?
Seeing as its only happening briefly during the  revs dropping I would suggest its something in there (bracket ?) hitting its resonant frequency as it passes quickly.
Aggravating, yes , but don't think its anything to be concerned about. Probably more the fact that you are more aware of it since you picked it up, a bit like a mosquito flying around the room, makes you want to swat it Huh  Big Grin
Reply
#14
yes ...correct short buzzing when rpm rev (or gain peak)


(28-10-2016, 06:47 PM)DaveH Wrote:  
(28-10-2016, 06:16 PM)andy-M Wrote:  tight belt means tight because it's new (almost) or tight -wrong ?

Wysłane z mojego SM-G925F przy użyciu Tapatalka

OK I think I caught the noise there. Sounds like something metallic vibrating?
Seeing as its only happening briefly during the  revs dropping I would suggest its something in there (bracket ?) hitting its resonant frequency as it passes quickly.
Aggravating, yes , but don't think its anything to be concerned about. Probably more the fact that you are more aware of it since you picked it up, a bit like a mosquito flying around the room, makes you want to swat it Huh  Big Grin


Wysłane z mojego SM-G925F przy użyciu Tapatalka
Reply
#15
If its under warranty, try to ignore it,if something's breaks just take it back,mines 06,2 Lt hdi,when I first start it up ,it sounds like an hoover in the engine bay?? After a few miles it stops?
Reply
#16
So that buzzing seems to be normal for 2016 hdi euro 6 ..i compared to 0km ODO model ..but one thing make me worry...
when I off air condition i hear rattle from air compressor area constant.

When ac is on ...silcence ...almost

rattling apears for 5 seconds and disappear for 40-50 seconds and so on ...

Service wasted my time ..as usual "this is new type of compressor and such a noise is common"

This is it
That rattle is most hearable from some distance from car 1m

https://vimeo.com/189544150


Wysłane z iPhone za pomocą Tapatalk Pro
Reply
#17
Ac changed to new one (warranty) strange rattling gone


Wysłane z iPhone za pomocą Tapatalk Pro
Reply
#18
We need a video of it not making the noise now. Big Grin
So where does this bit go then ?
Reply
#19
(22-12-2016, 09:11 AM)ffrenchie Wrote:  We need a video of it not making the noise now. Big Grin

LOL here it is ?>                           <? Wink
                                     Smile  It's too orangey for crow's It's just for me and my dog  Smile

                                                        Heart Heart Love a lot trust a few  Dodgy
 
                                                        

                                        
Reply
#20
(22-12-2016, 09:11 AM)ffrenchie Wrote:  We need a video of it not making the noise now. Big Grin




Wysłane z iPhone za pomocą Tapatalk Pro
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Solenoid location
Last Post: OMG
Today 06:07 PM
» Replies: 2
» Views: 89
Do thing right themselves?
Last Post: tdonbay
Today 05:44 PM
» Replies: 2
» Views: 134
Bolt torque settings
Last Post: LukeC
Today 05:42 PM
» Replies: 0
» Views: 5
Thoughts on Leisure battery powering radio when ...
Last Post: AlRamsay
Today 05:19 PM
» Replies: 0
» Views: 12
2012 1.6hdi Won't start!
Last Post: smutts
Today 03:06 PM
» Replies: 5
» Views: 535
roof rack
Last Post: Vowders
Today 12:33 PM
» Replies: 0
» Views: 28
Oil sump design.
Last Post: evdama
Today 10:59 AM
» Replies: 10
» Views: 718
Amdro Dometic Origo stove can it be changed to g...
Last Post: Wightlingo
Today 07:56 AM
» Replies: 2
» Views: 89
buying advice - bonnet release lever broken
Last Post: geoff
Today 06:51 AM
» Replies: 4
» Views: 124
OBD Faults listed - which how to fix?
Last Post: Anyinfo
12-05-2024 11:38 PM
» Replies: 3
» Views: 160

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK