Thread Rating:
  • 12 Vote(s) - 1.92 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Passenger Door Card
#1
What is the procedure for removing the Door Card from a mk2 Berlingo any hidden screws I have to watch out for? Is it just held in place by plastic clips how do you remove the interior handle and door handle trim piece?
Reply
#2
Not sure but there are probably blanking plugs to be removed from the door handles before using a torx-type socket on the screws. No doubt somebody who has already done the job will give you more details...
Berlingo Multispace 2.0HDI '54 reg Mediterranean Blue
Reply
#3
Thumbs Up 
Now this is something I'm interested in finding out. I wuold like to either replace or re-finish the coloured insert on the inside door handle and also while dismantled upgrade the door speakers.

pk7874 will know as will several other members who've done the job.:thumbsup:
The Older I get the Better I Was!  Cool
Reply
#4
I need to replace the electric window motor so access is required
Reply
#5
If it's the same as the mk1 the cover needs to come off the top of the door handle as you need to undo the screws under there.
Now an ex Berlingo owner, I have a C4
2010 (B9) Berlingo Multispace XTR HDi 112 - Kyanos Blue
Previously - 2002 (M49) Berlingo Multispace 2.0 HDi Diesel - Arctic Steel
Reply
#6
Right so I have torx type screws in the door handle what about the card itself popper clips?
Ok I set to this morning its quite easy;

Step 1 Remove Pull Handle trim with a flat blade driver and the trim unclips
Step 2 Unscrew the 2 x Torx Screws on handle assembly
Step 3 Prise off the the Door Open Handle trim just clipped in place
Step 4 Unclip door card held onto door by 10 or so popper clips
Step 5 CARE dont pull door card too far as speaker is mounted on door card
Step 6 Disconnect speaker and manoeuvre door card over the lock button
Step 7 Revealed white foam damp membrane and door card removed

Easy when you know how!
Thanks for the tips on how to chaps and chappasses!
[-] The following 1 user says Thank You to Newspaperman for this post:
  • Saul
Reply
#7
Hi all, i have a loose drivers side interior door handle on my M59 Berlingo. I used the above instructions to remove the surround and door card. Its looks like the spring has failed (see right hand side of the photo for example).

Can I get this part separately, and if so how do I replace? Thanks [Image: 27223e626eaea03089abf0252489ef6d.jpg]

Sent from my SM-G960F using Tapatalk
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Thoughts on Leisure battery powering radio when ...
Last Post: AlRamsay
Today 05:19 PM
» Replies: 0
» Views: 3
2012 1.6hdi Won't start!
Last Post: smutts
Today 03:06 PM
» Replies: 5
» Views: 535
roof rack
Last Post: Vowders
Today 12:33 PM
» Replies: 0
» Views: 27
Oil sump design.
Last Post: evdama
Today 10:59 AM
» Replies: 10
» Views: 717
Amdro Dometic Origo stove can it be changed to g...
Last Post: Wightlingo
Today 07:56 AM
» Replies: 2
» Views: 87
buying advice - bonnet release lever broken
Last Post: geoff
Today 06:51 AM
» Replies: 4
» Views: 123
Solenoid location
Last Post: saskak
Yesterday 07:30 PM
» Replies: 1
» Views: 87
OBD Faults listed - which how to fix?
Last Post: Anyinfo
12-05-2024 11:38 PM
» Replies: 3
» Views: 157
Do thing right themselves?
Last Post: Leonberger
12-05-2024 08:54 PM
» Replies: 1
» Views: 124
Rear Suspension Rebuilders?
Last Post: smutts
12-05-2024 03:37 PM
» Replies: 5
» Views: 182

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK