Thread Rating:
  • 3 Vote(s) - 2.67 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Removing Bluetooth Gizmo
#1
Hi

Just bought a used Mk3 Berlingo. The previous owner installed a gizmo which I have indentified as a Parrot bluetooth device.

As you can see in the photo, a wire to the device emerges from below the panel above the radio.

I have no use for this thing and want to remove it. How do I open the panel above the radio to disconnect it ?

Thanks.
Reply
#2
Photo??
The Older I get the Better I Was!  Cool
Reply
#3
Sorry the photo did not seem to appear in previous message

[Image: 2jctxqd.jpg]
Reply
#4
If you're removing the whole lot, is it for sale?

I would start by removing the radio; you can see the release tool holes on the right in your picture. That should help you see how to remove the upper cover.
Reply
#5
(31-10-2013, 07:42 PM)addo Wrote:  If you're removing the whole lot, is it for sale?

I would start by removing the radio; you can see the release tool holes on the right in your picture. That should help you see how to remove the upper cover.

Yes. Good point. That's probably how the wire was put in. Where can I get the release tools or something else to do the job ?
Reply
#6
You can get the correct tool to get the radio out from a motor factors or halfords or you can use correct sized nails or a bit of strong bent wire. They look like this http://www.ebay.co.uk/itm/UNIVERSAL-RADI...35cca2aaa4
Are we there yet????? Huh
Ex 1.6hdi van now 3 seater 1.4 multispace
Reply
#7
Yes, they are the dedicated type I recommend for the novice. Nails, wire etc work OK if you already know what you're "feeling for" with the little spring catches.
Reply
#8
I use 4 x 3mm hss drill bits
Reply
#9
Thanks to all who helped. I think I will be able to sort this now.
Reply
#10
I removed the radio and found that the wire from the Parrot bluetooth device leads somewhere round the back of the centre display (Time/Date etc)

Why does it connect there ?

Also - I would be happy to just cut the wire and chuck this thing away, rather than remove the display unit to unplug. Any risk of a problem from doing that ?

UPDATE : For the time being I have bundled the device and its wire with cable tie and shoved it all in behind the radio. So if I change my mind, I can always bring it out again.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Solenoid location
Last Post: saskak
Today 07:30 PM
» Replies: 1
» Views: 43
buying advice - bonnet release lever broken
Last Post: rnamman
Today 03:01 PM
» Replies: 3
» Views: 98
OBD Faults listed - which how to fix?
Last Post: Anyinfo
Yesterday 11:38 PM
» Replies: 3
» Views: 135
Do thing right themselves?
Last Post: Leonberger
Yesterday 08:54 PM
» Replies: 1
» Views: 101
Rear Suspension Rebuilders?
Last Post: smutts
Yesterday 03:37 PM
» Replies: 5
» Views: 160
2023 electric
Last Post: Anyinfo
Yesterday 09:43 AM
» Replies: 5
» Views: 143
Heater Matrix replacement
Last Post: Kieron G
Yesterday 06:20 AM
» Replies: 4
» Views: 113
Heavy steering
Last Post: Romahomepete
11-05-2024 06:06 PM
» Replies: 3
» Views: 80
Oil sump design.
Last Post: Blakey
11-05-2024 11:45 AM
» Replies: 9
» Views: 683
Is this a problem coming?
Last Post: Robho
11-05-2024 07:09 AM
» Replies: 5
» Views: 139

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK